Monthly Archives: November 2024

　　Choosing which surface treatment to use is a problem that every designer faces. There are many types of surface treatments to choose from, and not only should the economy and practicality of the design be considered, but also the processability of the assembly and even environmental protection requirements should be taken into consideration. The following is a brief introduction to some commonly used coatings for fasteners based on the above principles for reference.among non standard fasteners It has given great spiritual support to entrepreneurs, and more entrepreneurs will contribute to this industry in the future. https://jieruifasteners.com/

　　1. Electrogalvanizing

　　Electrogalvanizing is the most commonly used coating for commercial fasteners. It is relatively cheap and looks good. Common colors include black and military green. However, its anti-corrosion performance is average, and its anti-corrosion performance is the lowest among zinc plating (coating) layers. Generally, the neutral salt spray test of electrogalvanizing is within 72 hours. Special sealants are also used to make the neutral salt spray test reach more than 200 hours, but the price is expensive, which is 5 to 8 times that of general galvanizing. The torque-preload consistency of electrogalvanized fasteners is poor and unstable, and is generally not used for connections in important parts. In order to improve the torque-preload consistency, the method of applying lubricating substances after plating can also be used to improve and improve the torque-preload consistency.

　　2. Phosphating

　　A basic principle Phosphating is cheaper than galvanizing, but its corrosion resistance is worse than galvanizing. Oil should be applied after phosphating, and its corrosion resistance is greatly related to the performance of the oil applied. For example, after phosphating, applying general anti-rust oil, the neutral salt spray test is only 10 to 20 hours. Applying high-grade anti-rust oil can last for 72 to 96 hours. But its price is 2 to 3 times that of general phosphating oiling.

　　There are two common types of non-standard fasteners phosphating, zinc phosphating and manganese phosphating. Zinc phosphating has better lubrication performance than manganese phosphating, and manganese phosphating has better corrosion resistance and wear resistance than galvanizing. Its operating temperature can reach 225 degrees to 400 degrees Fahrenheit (107 to 204 degrees Celsius). Especially for the connection of some important parts. Such as the connecting rod bolts and nuts of the engine, cylinder heads, main bearings, flywheel bolts and wheel bolts and nuts. Phosphating high-strength bolts can also avoid hydrogen embrittlement problems, so in the industrial field, bolts above grade 10.9 are generally treated with phosphating surface treatment.

　　3. Oxidation blackening

　　Blackening + oiling is a very popular coating for industrial fasteners because it is the cheapest and looks good before the oil runs out. Since blackening has almost no anti-rust ability, it will rust quickly after oiling. Even in the presence of oil, the neutral salt spray test can only reach 3 to 5 hours.

　　4. Electroplating cadmium

　　Cadmium coating has good corrosion resistance, especially in marine atmospheric environment, its corrosion resistance is better than other surface treatments. The waste liquid treatment cost in the process of electroplating cadmium is high, and its price is about 15~20 times that of electroplating zinc. Therefore, it is not used in general industries and is only used in some specific environments. For example, it is used for non-standard fasteners for oil drilling platforms and HNA aircraft.

　　When selecting materials for various applications, especially those involving harsh environmental conditions, the ability of the material to withstand extreme temperatures is crucial. Custom silicone parts have become a popular choice due to their impressive temperature tolerance. In this article, we¨ll explore how custom silicone parts perform in extreme temperatures and why they are a preferred option in demanding applications.Even so, customized silicone mould We must also adhere to the quality of the industry and create unique products for the company. https://lxsiliconeparts.com/

　　Temperature Tolerance of Silicone

　　Silicone rubber is renowned for its ability to handle a wide range of temperatures. Typically, silicone parts can endure temperatures from -60＜C (-76＜F) to +230＜C (+446＜F). This makes silicone highly versatile, suitable for both freezing cold and intense heat. However, specific silicone formulations can extend these ranges even further.

　　custom silicone parts

　　Low-Temperature Performance

　　At low temperatures, silicone maintains its flexibility and elasticity, unlike many other materials that become brittle and prone to cracking. This property is crucial for applications in cold environments, such as aerospace components, refrigeration seals, and outdoor equipment. The low-temperature resilience ensures that silicone parts will continue to function effectively even in freezing conditions.

　　High-Temperature Performance

　　Silicone¨s high-temperature resistance makes it ideal for applications that involve heat exposure, such as automotive engine parts, cooking appliances, and industrial machinery. Silicone¨s ability to withstand elevated temperatures without losing its mechanical properties or degrading over time ensures long-term performance and reliability in high-heat environments.

　　Factors Affecting Temperature Resistance

　　Silicone Formulation: The temperature resistance of silicone can vary depending on its formulation. Standard silicone typically handles temperatures up to +230＜C (+446＜F), but specialized high-temperature silicones can tolerate even higher temperatures.

　　Additives and Fillers: Additives and fillers can enhance silicone¨s properties, including its temperature resistance. For instance, silicone compounds with added fillers may improve thermal stability and reduce the effects of extreme temperatures.

　　Application Conditions: The actual performance of silicone parts in extreme temperatures also depends on the specific conditions of use, such as exposure duration, thermal cycling, and mechanical stress. Proper material selection and design considerations are essential to ensure optimal performance.

　　custom silicone parts

　　Applications of High-Temperature Silicone Parts

　　Automotive Industry: Silicone seals and gaskets are used in engines, exhaust systems, and other high-heat areas to provide reliable sealing and performance under extreme temperatures.

　　Aerospace Industry: Silicone components in aircraft and spacecraft must withstand temperature fluctuations during flight and re-entry, making silicone an ideal material due to its thermal stability.

　　Electronics: Silicone encapsulants and insulators protect electronic components from heat and ensure reliable operation in high-temperature environments.

　　Cooking Appliances: Silicone bakeware and kitchen tools are designed to endure high temperatures in ovens and dishwashers, ensuring durability and safety.

　　Conclusion

　　Custom silicone parts are highly capable of withstanding extreme temperatures, making them suitable for a wide range of applications in both low and high-temperature environments. Their flexibility at low temperatures and stability at high temperatures provide exceptional performance and reliability. By choosing the right silicone formulation and considering application-specific factors, you can ensure that your custom silicone parts will perform effectively under challenging conditions.

　　Whether you need parts for automotive, aerospace, electronics, or any other demanding application, custom silicone parts offer the temperature resilience required for long-lasting and reliable performance.

　　According to a US news media report, the US Silicon Valley bosses spend more than one million dollars a year on personal security costs of investment, these Silicon Valley bosses, are keen to hire private bodyguards, of which Zuckerberg’s private security costs are the top investment among US technology company executives, reaching tens of millions of dollars. Security for people like Bezos costs about $1.6 million a year.However, in other words, we should know more about it. female bodyguard The law of development has brought new vitality to the whole industry and revitalized the market. http://huanyubodyguard.com/

　　private bodyguards

　　Like tech executives in the United States, Chinese tech executives also employ private bodyguards, like the former celebrity Jack Ma, who has elite bodyguards dedicated to providing him with security services and is rumored to be a low-key martial arts master who knows traditional Chinese martial arts. Most Chinese tech executives are surrounded by bodyguards who know kung fu skills like boxing, free combat, kickboxing, Brazilian jiu-jitsu, can drive a car, can dive, know basic business etiquette, and know technical reconnaissance skills. Some of the bodyguards employed by China’s technology giants are from professional bodyguard units such as the Huanyu Brothers Bodyguard Company in Shenzhen, China, and some are security personnel of the security department established by the company’s senior executives.

　　private bodyguards

　　In fact, not only the big men of Silicon Valley and Chinese technology companies have to take private bodyguards around them, but also the executives of many technology companies around the world will take private bodyguards, such as some company executives in India, Japan, and South Korea, when they travel, they have professional security services. It’s just that most of the world’s tech executives don’t spend as much on bodyguards as Mr. Berg does. However, hiring bodyguards has become the security consensus of world-class science and technology leaders, their social value and economic value is extremely high, once there is danger, the loss is immeasurable, so these people go where they will take private bodyguards.

　　Is it better to have a multi-core cable or a single-core cable? The difference between single-core cables and multi-core cables. Power cables are generally divided into single-core, double-core and three-core cables. Among them, single-core cables refer to cables with only one conductor in one insulation layer, while double-core cables refer to cables with two conductors in one insulation layer. In fact, both have their advantages and disadvantages. For example, when the line of a single-core cable is long, when the control circuit with a large current is used or when it is laid in water, in order to prevent or reduce the middle connector, or when single-core cables have better comprehensive safety engineering than multi-core cables, single-core cables can be used.For this reason, it can be speculated that multicore cable price The market feedback will get better and better, which is one of the important reasons why it can develop. https://www.linkcablecn.com

　　Is it better to have a multi-core cable or a single-core cable?

　　1. From the current point of view, the current passing through a multi-core cable with the same cross-sectional area is relatively larger than that of a single-core cable, and the load is large.

　　2. From the perspective of power loss, the two ends of the single-core cableare directly grounded, and the metal shielding layer of the cable may also generate circulating current that can reach the current carrying capacity of the cable, which wastes power and forms loss. Multi-core cables are generally three-core cables, because during the operation of the cable, the sum of the currents flowing through the three cores is zero, and there is basically no induced voltage at both ends of the cable metal shielding layer.

　　3. From the perspective of cost, among the wires of the same cross-sectional area, the cost of single-core cables is cheaper than that of multi-core cables, and multi-core cables are slightly more expensive.

　　4. From the perspective of installation, single-core cables appear harder when passing through pipes, while multi-core cables are softer and easier to wire.

　　Multicore Flexible Cables.jpg

　　Multicore Flexible Cable.jpg

　　The difference between single-core cables and multi-core cables

　　2-core cables: When the neutral line of 1kv and below power supplies is directly grounded, the number of cable cores of the single-phase control circuit should be 2-core cables when the maintenance line and the neutral point share the same conductor. For control circuits that can be powered by DC, 2-core cables should be used.

　　3-core cable: When the neutral line of 1kv and below power supply is directly grounded, the number of cable cores of the single-phase power control circuit is: When the protection line and neutral point are separate, it is advisable to use a 3-core cable.

　　4-core cable: 1kv and below 4-core cable (3+1 cable), in which the fourth core is used as a grounding protection, and also carries the unbalanced current and short-circuit capacity of the power supply system. (To learn more about cable technology, please click here, a lot of dry goods are waiting for you) Its size is determined by the unbalanced current and short-circuit capacity, but generally cannot be less than 1/2 of the phase line.

　　5-core cable: 1kv and below three-phase four-wire distribution room system, some electrical equipment distribution lines with higher safety requirements, and some communication centers and automation equipment that must ensure power safety and anti-interference grounding, it is advisable to use 5 copper core cable TN-C distribution room system, so that the protection line (PE line) and neutral point (PN line) are independent, and the cable core section is generally 3 large and 2 small or 4 large and 1 small or 5 large.

　　Multicore Flexible Cable supplier.jpg

　　The difference between 4-core cable and 3+1 core cable: 1kv and below three-phase four-wire distribution room system, when the protection line and neutral point share the same conductor, 4-core cable should be used, and the method of 3-core cable plus single-core cable to form a circuit cannot be used, or even the method of directly using the metal sheath or armored cable layer of 3-core cable as the neutral point. Otherwise, when the 3-phase current is unbalanced, it is equivalent to the operation of a single-core cable, which is easy to cause DC interference.

모모How do reverse cameras work? Installing one of these gadgets in your vehicle can make driving in reverse safer and easier. However, they don몶t provide a 360-degree view, so you몶ll still need to use your rearview mirror and stay focused while driving. A reversing camera, which can be wired or wireless, is always on, which gives you a better view of the area behind your vehicle. This can be very helpful to the driver.Even if there are obstacles to moving forward, 360 panoramic camera factory We should also persevere, forge ahead bravely, cut waves in the sea of the market, hang on to Yun Fan and strive for the first place. https://szdfpls.com

모모

모모Many of today몶s back-up cameras come with ruled lines. These lines help you maneuver into parking spaces and stay in them. Modern color displays can change colors to alert you to vaguely visible obstacles, and rear-facing sensors can also give you an audible warning if your vehicle is backing up. As well as these safety features, reversing cameras can be expensive, so you need to consider the benefits before making a purchase.

　　In daily life, keyboard is a relatively important thing. Whether you are working or playing games, keyboard is indispensable. A good-looking keyboard can bring a different use experience, at least it looks more comfortable at first glance. Mechanical keyboards have different axes, which can bring different typing experiences and meet most of the needs of different groups of people for keyboards. Therefore, more and more people use mechanical keyboards in recent years. When boys buy things, they may look at the performance at first glance, but girls may look at the appearance at first glance. However, in order to prevent girls from missing out on easy-to-use mechanical keyboards, there are many keyboards that have girls’ aesthetics, high appearance, and practical mechanical keyboard products.As it happens, many people are killed aula mechanical keyboard And bring more benefits, make it flourish, and promote the industry greatly. https://www.aulastar.com/

　　What are some good-looking keyboards that girls would also like to recommend?

　　AULA F98Pro

　　AULA F98Pro wireless Bluetooth three-mode customized keyboard, white, black, cherry pink color, high appearance, stylish and individual. Cool RGB lighting effect, 16 million colors for you to choose, anyone who sees it will love it. This keyboard adopts a three-mode design, which can connect to multiple devices at the same time, making operation more convenient. The surface of the keyboard is frosted, comfortable to the touch, and not easy to fatigue after long-term use. The keyboard uses a white transparent ice crystal axis, which has a smooth touch and comfortable operation, suitable for office and game use. The keyboard has a variety of shortcut keys for user convenience. The keyboard comes with a backlight function, which is more convenient to use at night. In addition, this keyboard also supports customized settings, which can be adjusted according to personal preferences to meet personalized needs. In addition, this keyboard also has a powerful waterproof function, so there is no need to worry about liquid splashing into the keyboard, which extends the service life of the keyboard. Whether it is office or game, it can meet user needs.

　　With the rapid development of science and technology, our lives have entered a new era of intelligence. In this era, cars are not only a means of transportation, but also an indispensable part of our lives. With the continuous advancement of automotive technology, our driving style is also undergoing profound changes.Therefore, this is the choice car camera manufacturer The reason, there is no denying its positive impact. https://szdfpls.com

　　Among them, ADAS (Advanced Driver Assistance Systems), as an important part of automotive intelligence, is gradually changing our driving style. It not only improves driving safety, but also provides drivers with a more convenient, safe and comfortable driving experience.

　　01. What is ADAS?

　　Advanced driver assistance systems (ADAS) are systems that integrate multiple sensors, cameras, radars and other equipment to achieve real-time perception and decision-making of the vehicle¨s surroundings. It can provide a variety of auxiliary functions during vehicle driving, such as adaptive cruise control and automatic parking, so that drivers can control the vehicle more easily and reduce driving fatigue and stress. At the same time, it can also sense changes in the surrounding environment in real time and remind drivers of potential dangers, thereby avoiding traffic accidents and improving driving safety.

　　02. How are ADAS classified?

　　The related functions covered by the ADAS system include lane departure warning, adaptive cruise control, etc., which are complicated and dazzling. Proper classification can help us better understand and apply them.

　　The ＾Terms and Definitions of Road Vehicle Advanced Driver Assistance Systems (ADAS)￣ released in 2020 divides the functions covered by ADAS into information assistance and control assistance.

　　To know door-to-door air freight better, we must know what door-to-door freight is. Door-to-door freight, just as the name suggests is a shipping method where cargo is picked up at the door of the sender and delivered to the recipient¨s door. It is from one place to the final place. The shipping company collects the cargo from the shipper and delivers it directly to the receiver.In the long run, sea freight The value will be higher and higher, and there will be a great leap in essence. https://www.honzalogistics.com/

　　Door-to-door air freights are a shipping method that can provide customers with a door-to-door collection, delivered to the airport, and delivered to the door after arriving at the destination airport. It specifically means that transportation involves picking up the goods from the factory warehouse and delivering them directly to the receiver¨s address. It is a rapid and convenient, the most popular and efficient option for shipping cargo internationally.

　　How does door-to-door air freight work?

　　The freight forwarder picks up the cargo from the specified address, organizes the transportation to the airport, and handles customs clearance events on its behalf, ensuring the smooth process and delivery of the cargo to the airline. At the receiving airport, the freight forwarder takes over the cargo from the airline and organizes both customs clearance and delivery to the final receiver.

　　In daily life, we often use plastic PE gloves. Plastic gloves are disposable items that are easily consumed in daily life. We use a pair for stewed food, a pair for crayfish, and a pair for home hygiene. While plastic gloves provide us with convenience, they also cause a certain degree of environmental pollution due to excessive use and lack of recycling, becoming “white garbage”. As environmental protection becomes more and more important, we need to enhance our environmental awareness and pay attention to this matter.Under people’s attention biodegradable mailing bags Finally grow into what people need, born for the market and come for the demand. https://biodegradable-gd.com

　　Biodegradable PLA gloves are disposable gloves made from polylactic acid (PLA), a biodegradable and bioactive thermoplastic derived from renewable resources like corn starch or sugarcane. Unlike traditional disposable gloves made from synthetic materials such as nitrile or latex, PLA gloves are designed to break down more quickly and sustainably in the environment. Here¨s a detailed look at compostable PLA gloves:

　　Benefits of biodegradable gloves:

　　1. The performance remains unchanged during the shelf life, and after use, it can be degraded into inorganic substances such as carbon dioxide and water under natural environmental conditions, becoming nutrients for plants and will not pollute the environment

　　2. Easy to use, not only green and healthy, but also very convenient to use

　　3. The raw material source of biodegradable gloves is very environmentally friendly. The raw material comes from polylactic acid PLA, which comes from plant resources such as corn and potatoes. It is green, environmentally friendly and sustainable. It will not come from petroleum like plastic PE gloves, which is not sustainable, and the production process is very polluting.

　　When purchasing compostable gloves, we need to try to choose large platforms for purchase. When purchasing, you need to confirm the ingredients of the biodegradable gloves with the merchant, which are generally polylactic acid PLA, polyadipate PBAT, and starch. Others such as PE+starch are pseudo-degradable gloves, not qualified degradable gloves, and need to be purchased with caution.

　　Biodegradable PLA gloves are a promising alternative to traditional disposable gloves, offering significant environmental benefits through the use of renewable resources and compostable materials. As technology and manufacturing processes advance, the performance and accessibility of compostable PLA gloves are likely to improve, making them a viable option for a broader range of applications.

　　When it comes to capturing action-packed moments, image stabilization plays a crucial role in ensuring that your footage remains smooth and clear. The firefly Q6 V3 action camera, a popular choice among enthusiasts, indeed comes equipped with gyro image stabilization. This feature significantly enhances the quality of videos by reducing the impact of shakes and vibrations.As it happens, many people are killed hawkeye action camera manufacturers And bring more benefits, make it flourish, and promote the industry greatly. https://hawkeyecameras.com/

　　Understanding Gyro Image Stabilization

　　Gyro image stabilization uses a gyroscope to detect the camera’s movements and adjust the image sensor accordingly. This real-time adjustment helps to counteract any motion that could cause blurriness or jitteriness in the video. For action cameras, this technology is essential, especially in dynamic environments where movement is constant.

　　Real-World Application

　　Let’s consider a real-world scenario: mountain biking. Riders often face rough terrains that can make footage shaky and unpleasant to watch. With the Firefly Q6 V3, the gyro image stabilization ensures that even on the bumpiest trails, the footage remains stable. This stability allows viewers to focus on the action without the distraction of a shaky camera.

　　Another practical example is during water sports, such as surfing or kayaking. The motion of the water combined with the rapid movements of the user can make it challenging to capture clear footage. The Firefly Q6 V3¨s gyro stabilization shines in these conditions, providing smooth video that truly captures the thrill of the experience.

　　Does the Firefly Q6 V3 Action Camera Have Gyro Image Stabilization?(夕1)

　　Case Study: User Experience

　　A popular YouTuber, known for documenting extreme sports, switched to the Firefly Q6 V3 for his channel. He reported a noticeable improvement in video quality due to the gyro image stabilization. In his videos, whether he was skydiving, skiing, or skateboarding, the footage was consistently stable, enhancing the viewing experience for his audience. The reduction in post-production stabilization time was an added benefit, allowing him to publish videos more quickly.

　　Conclusion

　　The inclusion of gyro image stabilization in the firefly Q6 V3 action camera makes it a formidable tool for capturing high-quality, stable footage in a variety of action-packed scenarios. Whether you are an extreme sports enthusiast or someone who enjoys capturing dynamic moments, this feature ensures that your videos are smooth and enjoyable to watch. The Firefly Q6 V3 stands out as a reliable choice for those who demand performance and stability in their action cameras.