Yearly Archives: 2024

　　Color calibration of LED rental screen is a very important and precise work. Color calibration is not only a simple adjustment of brightness and contrast, but also a comprehensive art involving color science, visual perception and display technology depth. Through accurate color calibration, we can make the LED rental screen present real and vivid colors, and bring more shocking and pleasant visual experience to the audience. Then do you know the steps of color calibration for LED rental screen? The following Weishi Technology Xiaobian introduces you:In the long run, led poster display The value will be higher and higher, and there will be a great leap in essence. https://www.cnpled.net/

　　led screen rental

　　Steps for color calibration of LED rental screen:

　　1. Preparation.

　　Before starting the color calibration, we need to ensure that the LED rental screen is trouble-free and in normal working condition. In addition, it is also very important to clean the surface of the LED rental screen, which can be cleaned with professional cleaners and fiber cloth.

　　2. Select the color calibration tool.

　　In order to make the LED rental screen achieve more accurate color calibration effect, we can choose professional color calibration tools, such as color calibrator or color management system. These tools can detect and correct the color of each pixel, thus achieving more accurate color calibration.

　　3. Set the color calibration.

　　After connecting the color calibrator or color management system, follow the tool’s prompts to enter the LED rental screen color temperature and color calibration setting interface. On this interface, you can adjust the color temperature, brightness, contrast, saturation and other parameters of the LED rental screen to make the image display in a good state.

　　4. Conduct color calibration test.

　　After the LED rental screen completes the color calibration setting, it needs to be tested to verify the effect. You can use professional color calibration test images to observe whether the results displayed on the LED rental screen meet expectations. If problems such as color cast and color difference are found, fine adjustment can be made according to the actual situation until satisfactory results are achieved.

　　To sum up, it is the steps of color calibration for LED rental screen. Through the above steps, the color calibration of LED rental screen can be ensured to be fully and accurately implemented, thus providing users with a high-quality visual experience.

　　In the pursuit of superior oral hygiene, the choice of a toothbrush plays a crucial role. Enter the T9 S19 customized high-end electric toothbrushes by Ximalong, a brand that combines cutting-edge technology with user-centric design. This article delves into the features and benefits of these high-end electric toothbrushes, focusing on their waterproof capabilities, battery life, and overall performance.In the long run, kids electric toothbrush The value will be higher and higher, and there will be a great leap in essence. https://www.21brush.com

　　T9 S19: The Pinnacle of Electric Toothbrushes

　　Ximalong¨s T9 S19 electric toothbrushes are crafted for those who demand the best in oral care. These toothbrushes are not just about aesthetics; they are engineered to deliver a thorough and efficient cleaning experience. Here¨s a closer look at the key features that set the T9 S19 apart:

　　T9 S19 Customized High-End Electric Toothbrushes

　　1. IPX7 Waterproof Rating

　　One of the standout features of the T9 S19 is its IPX7 waterproof rating. This high level of water resistance means the toothbrush can be safely used in the shower or rinsed under running water without any risk of damage. The waterproof design enhances convenience and ensures durability, making the T9 S19 an ideal choice for daily use.

　　2. 2000mAh Lithium Battery

　　Battery life is a critical factor in the performance of electric toothbrushes, and the T9 S19 excels in this area. Equipped with a powerful 2000mAh lithium battery, this toothbrush offers extended usage on a single charge. Users can enjoy uninterrupted oral care routines without the frequent need to recharge, making it perfect for both home use and travel.

　　3. Type-C Fast Charging

　　The T9 S19 supports Type-C fast charging, a feature that significantly reduces downtime. With just 6 hours of charging, the toothbrush is ready to deliver days of optimal performance. The convenience of Type-C charging also means that you can use the same charger for multiple devices, reducing clutter and simplifying your life.

　　T9 S19 Customized High-End Electric Toothbrushes

　　4. Lightweight Design at 118g

　　Weighing in at just 118 grams, the T9 S19 is incredibly lightweight, making it easy to handle and maneuver during brushing. The ergonomic design ensures that users of all ages can comfortably use the toothbrush, making it a versatile addition to any household.

　　5. Quiet Operation with Less Than 60 Decibels

　　Noise can be a concern with electric toothbrushes, but the T9 S19 addresses this with its ultra-quiet operation. Operating at less than 60 decibels, this toothbrush provides a peaceful brushing experience, allowing you to focus on your oral care routine without the distraction of loud buzzing.

　　Why Choose the T9 S19 Customized High-End Electric Toothbrushes?

　　The T9 S19 by Ximalong is more than just a toothbrush; it¨s a complete oral care solution. Its combination of advanced features, such as IPX7 waterproofing, a powerful lithium battery, Type-C fast charging, and quiet operation, makes it a top choice for those seeking a high-end electric toothbrush. The lightweight design further enhances its appeal, ensuring that users can achieve the best results with minimal effort.

　　T9 S19 Customized High-End Electric Toothbrushes

　　Conclusion

　　Investing in the T9 S19 customized high-end electric toothbrushes by Ximalong is a decision that brings long-term benefits to your oral health. With its exceptional features and user-friendly design, this toothbrush is poised to become an essential part of your daily routine. Whether you¨re looking for a waterproof electric toothbrush that can handle the rigors of daily use or a device that offers superior battery life and quiet operation, the T9 S19 delivers on all fronts.

　　Production process of PET blood collection tube:In order to open the market, moulded plastic parts Constantly improve the ability of business development and create an extraordinary brand image for it. https://www.dghrjmmj.com

　　Raw material preparation: High quality PET particles are selected as the main raw material, and certain additives are added to improve performance.

　　Injection molding: Heating PET particles to a molten state and injecting them into the blood collection tube mold through an injection molding machine to form a preliminary tube shape.

　　Cooling solidification: Cooling in the mold to solidify and shape the tube body.

　　Demoulding and removal: Remove the formed blood collection tube from the mold.

　　Subsequent processing may include trimming the pipe mouth, inspecting the appearance quality, and performing disinfection treatment.

　　Production process of test tube mold accessories:

　　Design and Planning: Based on the requirements of the mold, design the shape, size, and structure of the accessories.

　　Material selection: Choose suitable steel materials, such as tool steel, according to the requirements of the accessories.

　　Rough machining: Processing steel into rough shapes through processes such as turning and milling.

　　Heat treatment: Quenching, tempering and other heat treatments are carried out on the rough machined parts to improve hardness and wear resistance.

　　Precision machining: high-precision machining methods such as grinding and electrical discharge machining are used to achieve the designed precision and surface roughness requirements for the parts.

　　Assembly and debugging: Assemble and debug various mold components to ensure their precision and smooth movement.

　　As a new energy home appliance, air source heat pumps are becoming more and more popular among users. In addition to integrating heating and cooling, how much do you know about air source heat pumps? Let’s explore it together today.from Inverter heat pump From the reference value, it can also bring a lot of inspiration to other industries. http://mangoenergyheatpump.com

　　1. How does an air source heat pump work?

　　Air source heat pump is a form of heat pump that can convert low-level thermal energy that cannot be directly used (such as heat contained in air, soil, and water) into usable high-level thermal energy, thereby achieving the purpose of saving some high-level energy (such as coal, gas, oil, electricity, etc.). Air source heat pumps are different from air conditioners. The heating efficiency of air conditioners is not high, and they will not work when the temperature is below -5≧. There is no need to worry about air source heat pumps. The Laurite air source heat pump has a strong low-temperature heating capacity. It uses EVI jet enthalpy increase technology and can provide strong heating at -30≧.

　　On the contrary, air source heat pumps are not only powerful, but also very energy-saving. Mango air source heat pumps use air energy, supplemented by a small amount of electricity, to achieve heating and cooling. One unit of electricity can generate up to four units of heat energy, with an energy efficiency ratio of up to 400%. The main components use variable frequency compressors, variable frequency fans, and variable frequency water pumps, which can perform stepless speed regulation according to changes in the system load, reducing the consumption of useless work and making the unit run more efficiently.Mango air source heat pump has the functions of heating and cooling. It uses air energy and only requires a small amount of electricity to generate three to four times the heat energy. It is more energy-saving and environmentally friendly. Although it is a little more expensive than air conditioning, the service life of air source heat pump is up to 15 years, coupled with lower power consumption. In the long run, using air source heat pump is cheaper and more affordable than air conditioning. Unlike air conditioning, air source heat pump uses a water system, and the air is more moist and gentle during heating, not as dry as air conditioning.

　　2. Ease of Installation and Low Maintenance

　　Air source heat pumps are relatively easy to install compared to other heating systems. They don’t require extensive infrastructure or fuel storage, making them suitable for a wide range of properties. Whether you are upgrading your current heating system or installing one in a new build, a Manggo Air Source Heat Pump can be integrated with minimal disruption.

　　Additionally, ASHPs have fewer moving parts and do not rely on combustion processes, which reduces the wear and tear on the system. This results in lower maintenance requirements and longer operational life, providing peace of mind and added convenience.

　　3. Smart Technology Integration

　　Many modern air source heat pumps, including those from Manggo, come with smart technology integration. This allows for remote control and monitoring of your heating system via smartphone apps or home automation systems. Such features enhance user convenience, allowing you to optimize energy usage and maintain desired comfort levels with ease.

　　4. Environmental Benefits

　　Air source heat pumps are an environmentally friendly heating option. They reduce greenhouse gas emissions by utilizing renewable energy from the air, which helps in combating climate change. By choosing a Manggo Air Source Heat Pump, you contribute to a reduction in your carbon footprint, aligning with global efforts to promote sustainability and reduce dependence on fossil fuels.

　　Choosing to buy an air source heat pump, particularly from a reputable brand like Manggo, is a wise investment for both residential and commercial properties. The combination of energy efficiency, cost savings, environmental benefits, versatility, and reliability makes it an attractive option. With competitive heat pump prices and potential incentives, the initial investment is quickly offset by the long-term advantages. Whether used as a commercial water heater or for year-round climate control, a manggo air source heat pump is a smart, sustainable choice that meets modern heating and cooling needs efficiently.

　　In today¨s world, ensuring safety during travel and in public spaces has become a paramount concern. One critical area of focus is the detection of hazardous liquids that can pose significant threats. The ZA-600BX Portable Liquid Scanner emerges as an indispensable tool in this regard, offering advanced capabilities to enhance safety on the go. Here¨s a look at the benefits of the ZA-600BX and why it is a must-have for security applications.The above conclusions show that baggage scanner machines To a great extent, it can bring new vitality to the market and make the industry develop well. https://secuzoan.com/

　　za-600bx liquid scanner

　　1. Advanced Detection Technology

　　The ZA-600BX Portable Liquid Scanner employs cutting-edge technology to detect and identify hazardous liquids quickly and accurately. Utilizing advanced spectroscopic analysis, this device can differentiate between safe and dangerous substances within seconds. This rapid detection capability is crucial for security checkpoints at airports, train stations, and public events, ensuring that potential threats are identified and mitigated swiftly.

　　2. Portability and Convenience

　　One of the standout features of the ZA-600BX is its portability. Designed to be lightweight and compact, it can be easily carried and operated by security personnel. This portability allows for flexible deployment in various environments, from large transportation hubs to small-scale events. Its user-friendly interface ensures that operators can use the device with minimal training, making it a practical solution for enhancing security on the go.

　　3. Non-Invasive and Safe Operation

　　The ZA-600BX Portable Liquid Scanner offers a non-invasive method of inspecting liquids. Unlike traditional methods that may require opening and testing liquid containers, the ZA-600BX scans through the container, preserving the integrity of the liquid while ensuring safety. This non-invasive approach is not only faster but also reduces the risk of contamination and exposure to hazardous substances for both security personnel and the public.

　　4. Wide Range of Applications

　　The versatility of the ZA-600BX makes it suitable for a broad range of applications. In addition to its use at airports and train stations, it is also valuable in settings such as government buildings, stadiums, concert venues, and border crossings. Its ability to quickly and accurately identify hazardous liquids enhances security measures in any location where large numbers of people gather, providing peace of mind and protecting public safety.

　　5. High Accuracy and Reliability

　　Accuracy is paramount in security applications, and the ZA-600BX delivers exceptional reliability. It is equipped with sophisticated sensors and algorithms that ensure precise identification of liquids. The device has undergone rigorous testing and validation to meet the highest standards of performance. This high level of accuracy minimizes false positives and negatives, ensuring that security personnel can trust the results and act confidently on the information provided.

　　6. Real-Time Data and Reporting

　　The ZA-600BX provides real-time data and reporting capabilities, allowing for immediate analysis and decision-making. This feature is particularly useful in dynamic environments where quick responses are essential. The device can be integrated with other security systems to provide comprehensive monitoring and reporting, enhancing the overall security infrastructure.

　　7. Cost-Effective Solution

　　Investing in the ZA-600BX Portable Liquid Scanner is a cost-effective solution for enhancing security. Its advanced technology and robust performance reduce the need for multiple security checks and manual inspections, saving time and resources. The durability and low maintenance requirements of the device further contribute to its cost-effectiveness, providing long-term value for security operations.

　　8. Enhancing Public Confidence

　　In an era where safety concerns are paramount, the presence of advanced security measures like the ZA-600BX can significantly enhance public confidence. Knowing that effective and efficient liquid scanning technology is in place reassures travelers and attendees that their safety is a top priority. This confidence can lead to increased patronage of public events and transportation systems, benefiting both security agencies and the broader community.

　　according to motion detector sensor Industry veterans said that its development will still be in a good situation. https://www.sunlit-tech.com

　　PIR sensor (Passive Infrared Sensor) is a passive infrared sensor. It is widely used in consumer products such as doorbells, cat eyes, induction switches, night lights, and security because of its low power consumption, low price, and simple use.

　　(1) PIR detection principle

　　PIR also has another alias, which is pyroelectric infrared sensor. Its detection principle is the pyroelectric effect, that is, the phenomenon that a substance will generate electric charge when the temperature changes. The normal human body temperature is 36-37 degrees, and the infrared radiation released is about 9-10um. The detection wavelength range of pir motion detector is generally in the range of 5-14um. That is, within the detection range of PIR, if there is an energy change of 5-14um wavelength, the PIR sensor will generate a current change, thereby giving a trigger signal. It should be noted here that PIR detects energy changes, not infrared radiation of a fixed wavelength. If an object with a fixed wavelength is not moving, PIR will not detect it.

　　(2) Advantages of PIR

　　Low power consumption, typical power consumption is about 10uA

　　Low price, ranging from one or two yuan to five or six yuan

　　Easy to use, the simplest one only needs to detect a pin level signal

　　(3) PIR classification

　　There are many types of PIR motion detector, which can be roughly divided into the following ways:

　　Enablement controllable: switchable PIR

　　Output signal type: digital PIR and analog PIR

　　Is the sensitivity adjustable: adjustable PIR and non-adjustable PIR

　　Sensitivity adjustment method: hardware adjustment and software programming adjustment PIR

　　(4) PIR selection

　　When selecting a PIR sensor, we generally need to consider the following basic requirements: voltage range, operating current, number of pins required, data output format, whether the sensitivity is adjustable, structural package size, and compatibility with the Fresnel lens. Another important consideration is cost. Without considering cost, it doesn¨t matter whether you choose a model or not. Just choose the best one. In actual product development, especially for consumer products, prices are very sensitive. Basically, all bosses want to use the cheapest device and debug it to achieve the best effect, especially for products with large shipments. If you don¨t have high requirements for product quality, it doesn¨t matter. If you have strict requirements for product quality and performance, you need to be very careful when selecting a model to avoid replacing the device when you find that it does not meet the requirements in the later stages of the project.

　　Debugging is an essential key link of folding LED display screen. Through debugging, it can not only ensure the normal work of folding LED display screen, but also better optimize its performance, improve the display effect, meet specific needs and ensure long-term stable operation. However, the debugging of folding LED display screen is not a simple matter. In this process, we often need to pay attention to many aspects in order to better complete the debugging work. So do you know what to pay attention to when debugging the folding LED display? The following Weishi Technology Xiaobian introduces you:From some points of view, led poster display It is the core driving force to better promote the rapid development of the surrounding markets. https://www.cnpled.net/

　　Folding LED display screen

　　Pay attention to the following aspects when debugging the folding LED display:

　　First, the basic function check

　　Power check:

　　Ensure that the power supply is connected correctly and there is no short circuit or open circuit. At the same time, check whether the output voltage and current of power supply meet the requirements of folding LED display screen.

　　Signal check:

　　Make sure that the signal wire is connected correctly without looseness or damage. At the same time, check whether the output signal of signal source (such as computer and video player) is stable and compatible with folding LED display screen.

　　Second, the display effect adjustment

　　Brightness and contrast:

　　Adjust the brightness and contrast of the folding LED display screen according to the use environment, so as to avoid too bright or too dark affecting the viewing effect. At the same time, pay attention to keep the brightness uniform to avoid uneven brightness or local overexposure.

　　Color correction:

　　Use professional color correction tools to correct the color of folding LED display screen to ensure accurate and bright color. At the same time, pay attention to the balance of red, green and blue primary colors to avoid color deviation or distortion.

　　Color temperature adjustment:

　　If the folding LED display screen is used for shooting background or stage effect, it is necessary to adjust the color temperature according to the actual needs to match the color temperature of the surrounding environment.

　　Third, physical and mechanical adjustment

　　Folding mechanism inspection:

　　Check whether the folding mechanism is flexible and stable, and there is no jamming or looseness. At the same time, ensure that the folded LED display screen is flat, without crease or distortion.

　　Installation and fixation:

　　If the folding LED display screen needs to be installed on the wall or bracket, it needs to be installed firmly and stably to avoid shaking or falling off. At the same time, pay attention to the ventilation and heat dissipation in the installation position to avoid damage to the folding LED display screen caused by long-term high-temperature operation.

　　Fourth, the stability and reliability test

　　Long-running test:

　　The stability and reliability of folding LED display screen were observed by long-term continuous operation test. At the same time, pay attention to check the temperature change, power consumption and whether there is abnormal alarm or shutdown of the folding LED display screen.

　　Environmental adaptability test:

　　According to the actual situation of the use environment, environmental adaptability tests such as temperature, humidity and electromagnetic interference are carried out. At the same time, ensure that the folding LED display screen can work normally in various harsh environments.

　　V. Safety and Maintenance

　　Electrical safety:

　　Ensure that the electrical system of the folding LED display meets the safety standards and there are no exposed wires or connectors. At the same time, regularly check the insulation performance and grounding of the electrical system.

　　Daily maintenance:

　　Regularly clean the dust on the surface and inside of the folding LED display screen to maintain its good heat dissipation performance. At the same time, regularly check whether the hardware connection and fixing screws of the folding LED display screen are loose or damaged.

　　Eyes are the windows of the human soul. Similarly, headlights are like the eyes of heavy trucks. Whether it is day or night, driving lights are crucial for vehicles. They can not only help you see the road clearly, but also remind the other party of the oncoming car, which is helpful for driving safety. Therefore, timely maintenance of headlights is an indispensable part for drivers.After screening and investigation led strobe warning lights It is likely to become a new force driving economic development. https://www.lkx-mascarello.com

　　First of all, we need to check the working status of headlights regularly. Including low beam, high beam, clearance lights, lighting, turn signals and fog lights. Every time you start the vehicle, you should check the vehicle lights. If you find that the lights are weak or bad, you must replace them in time.

　　Secondly, we should pay attention to the cleaning of headlights. Trucks are on the road most of the time, and the surface of the headlights is often covered with dust or other stains, which directly affects the lighting effect of the headlights. Therefore, regular cleaning of the headlights and keeping their surface clean are important to ensure the lighting effect of the headlights.

　　Maintain Car Lights for Clearer and Safer Driving

　　In addition, we must also be familiar with the rules for the use of headlights. If there is a vehicle ahead, the high beam should be switched to low beam in time to avoid glare to others and avoid driving risks; when turning or changing lanes, the turn signal should be turned on in advance to remind vehicles on the same road to drive in an orderly manner.

　　Finally, choosing high-quality headlights cannot be ignored. In order to ensure driving safety, the choice of headlights should pay attention to both brand and quality, and the installation should be carried out in accordance with the operating manual to avoid malfunctions. The high quality of Dayun heavy-duty truck headlights, coupled with exquisite headlight design and unique lines, injects a smart soul into the car.

　　Maintain Car Lights for Clearer and Safer Driving

　　In general, drivers must pay attention to the inspection and maintenance of headlights. Only when the headlights are bright and clear enough can we drive safely at night or in bad weather and enjoy a pleasant driving experience. Dayun heavy-duty truck headlights are bright, like bright stars in the night sky, illuminating the road ahead for truck friends!

　　High-strength socket head screws are indispensable components in various industrial applications due to their superior strength, reliability, and versatility. These fasteners are designed to handle high-stress environments and ensure secure and durable connections. Here, we explore the key industrial applications where high-strength socket head screws play a crucial role.On the other hand, 304 stainless steel screws It also brings tangible benefits to everyone and feels useful. It is a model of the industry. https://shwhardware.com

　　1. Aerospace Industry

　　The aerospace industry demands fasteners that can withstand extreme conditions, including high temperatures, vibrations, and stress. High-strength socket head screws are used extensively in aircraft assembly, engine components, and avionics. Their ability to maintain integrity under intense pressure and temperature variations makes them ideal for aerospace applications.

　　socket head screws

　　2. Automotive Manufacturing

　　In the automotive industry, precision and durability are paramount. High-strength socket head screws are used in assembling critical components such as engines, transmissions, and suspension systems. These screws ensure that the connections remain secure even under the strain of high-speed operations and harsh driving conditions.

　　3. Heavy Machinery and Equipment

　　Heavy machinery and industrial equipment require fasteners that can endure significant loads and mechanical stress. High-strength socket head screws are used in construction equipment, agricultural machinery, and mining equipment. Their robust construction and reliable performance make them essential for maintaining the structural integrity of these machines.

　　4. Marine Applications

　　Marine environments pose unique challenges, including exposure to saltwater, which can lead to corrosion. High-strength socket head screws, particularly those made from corrosion-resistant materials such as stainless steel or titanium, are used in shipbuilding, offshore platforms, and marine equipment. These screws ensure long-lasting performance and reliability in harsh maritime conditions.

　　5. Medical Devices

　　Precision and reliability are critical in the medical field. High-strength socket head screws are used in the manufacturing of medical devices and equipment, such as surgical instruments, diagnostic machines, and implants. Their ability to provide secure and stable connections is vital for patient safety and the proper functioning of medical devices.

　　6. Electronics and Telecommunications

　　The electronics and telecommunications industries require fasteners that can provide precise and secure connections in compact and sensitive devices. High-strength socket head screws are used in assembling electronic components, circuit boards, and communication equipment. Their small size and high strength make them ideal for ensuring the reliability and longevity of electronic devices.

　　7. Renewable Energy

　　In the renewable energy sector, high-strength socket head screws are used in the construction and maintenance of wind turbines, solar panels, and hydroelectric equipment. These screws ensure the stability and durability of structures exposed to varying weather conditions and mechanical stresses.

　　8. Manufacturing and Assembly Lines

　　High-strength socket head screws are widely used in manufacturing and assembly lines for securing machinery, fixtures, and tooling. Their reliable performance helps maintain the efficiency and safety of production processes.

　　socket head screws

　　Conclusion

　　High-strength socket head screws are essential components across various industries due to their exceptional strength, reliability, and versatility. From aerospace and automotive to medical devices and renewable energy, these screws play a critical role in ensuring the integrity and performance of industrial applications. Their ability to withstand high-stress environments and provide secure connections makes them a preferred choice for engineers and manufacturers worldwide.

　　The V3 smart color screen toothbrush is designed to elevate your oral care with its versatile brushing modes. Each mode is tailored to address specific dental needs, ensuring a personalized and effective brushing experience. Here¨s a closer look at each mode and its benefits:So we can draw a preliminary conclusion, high quality tooth brush It is helpful to the needs of the industry market and social development. https://www.21brush.com

　　1.White Mode: This mode is specifically formulated to help whiten your teeth. By using high-frequency sonic vibrations, the White Mode targets surface stains and polishes your teeth, restoring their natural brightness. It’s ideal for those who want to enhance their smile and remove everyday discoloration.

　　2.Cleaning Mode: Perfect for your daily brushing routine, the Cleaning Mode delivers a comprehensive clean by effectively removing plaque and food particles. The powerful sonic vibrations reach all areas of your mouth, ensuring a thorough clean that helps maintain overall oral health.

　　3.Gum Care Mode: Focused on gum health, the Gum Care Mode provides a gentle brushing experience that helps massage and stimulate your gums. This mode is beneficial for improving gum circulation and reducing the risk of gum disease, making it a great choice for those with sensitive gums or gingivitis.

　　4.Refresh Mode: When you need a quick and revitalizing clean, the Refresh Mode offers a fast yet efficient brushing session. This mode is ideal for those moments when you need to freshen up your mouth quickly, providing a burst of cleanliness and freshness.

　　5.Sensitive Mode: Designed for those with sensitive teeth and gums, the Sensitive Mode uses softer vibrations to ensure a gentle brushing experience. It minimizes discomfort while still providing effective cleaning, making it suitable for individuals who experience sensitivity with other toothbrushes.

　　V3 smart color screen toothbrush

　　Key Features of the V3 Smart Color Screen Toothbrush

　　Color Options: Available in elegant White, soft Pink, and vibrant Blue, allowing you to choose according to your personal style.

　　Sonic Motor: The toothbrush boasts a powerful sonic motor that produces up to 42,000 vibrations per minute. This high-frequency action ensures deep cleaning and efficient plaque removal.

　　Waterproof Function: With an IPX7 waterproof rating, the toothbrush is fully protected against water ingress, making it safe for use in the bathroom and easy to clean.

　　Extended Standby Time: Enjoy up to 200 days of standby time on a single charge, ensuring your toothbrush is ready when you need it.

　　Convenient Charging: Features a modern Type-C charging port for fast and easy recharging. The battery has a capacity of 2000mAh and charges fully in just 6 hours.

　　Durable Construction: Made from high-quality PC+ABS, the toothbrush is built to withstand regular use and offer long-lasting performance.

　　Quiet Operation: Designed to operate at less than 45 decibels, the toothbrush provides a quiet brushing experience, ensuring a peaceful start to your day.

　　Smart Timing Feature: The toothbrush includes a 30-second reminder to help you switch brushing zones, promoting a thorough and even clean across all areas of your mouth.