Yearly Archives: 2024

　　Cold heading and cold extrusion are basically deformation processes under the same conditions, but they are different in operation. Cold heading is a forging deformation of smaller workpieces and is often used in the fastener industry. Cold extrusion is an extrusion deformation of larger workpieces and has a wide range of uses.It is reported that, non standard fasteners The data performance is getting better and better, which is of great reference value and is likely to become the vane of the industry. https://jieruifasteners.com/

　　1. What is cold extrusion

　　Cold extrusion is a processing method in which a metal blank is placed in a cold extrusion die cavity and, at room temperature, a punch fixed on the press is used to apply pressure to the blank to cause the metal blank to undergo plastic deformation to produce parts. Obviously, cold extrusion processing relies on the die to control the flow of metal and relies on the large-scale transfer of metal volume to form parts. In terms of extrusion equipment, my country has the ability to design and manufacture extrusion presses of various tonnages. In addition to using general mechanical presses, hydraulic presses, and cold extrusion presses, friction presses and high-speed and high-energy equipment have also been successfully used for cold extrusion production.

　　At present, cold extrusion technology has been widely used in industrial sectors such as fasteners, machinery, instruments, electrical appliances, light industry, aerospace, shipbuilding, and military industry, and has become one of the indispensable and important processing methods in metal plastic volume forming technology. With the advancement of science and technology and the continuous improvement of product technical requirements in the automobile, motorcycle, household appliances and other industries, cold extrusion production technology has gradually become the development direction of refined production of small and medium-sized forgings.

　　2. What is cold heading

　　Cold heading is one of the new processes of metal pressure processing with little or no cutting. It is a processing method that uses the plastic deformation of metal under the action of external force, and with the help of a mold, the metal volume is redistributed and transferred to form the required parts or blanks. The cold heading process is most suitable for the production of non standard fasteners such as bolts, screws, nuts, rivets, and pins. The commonly used equipment for cold heading is a dedicated cold heading machine. If the production volume is not too large, it can also be replaced by a crank press or a friction press.

　　Cold heading technology has high productivity, good product quality, and greatly reduces material consumption, reduces production costs, and improves working conditions. Therefore, it is more and more widely used in mechanical manufacturing, especially in the production of standard fasteners. Among them, the most representative products produced by multi-station cold heading machines are bolts, screws and nuts.

　　3. Are cold heading and cold extrusion the same thing?

　　Cold heading and cold extrusion are basically deformation processes under the same conditions, but they are different in operation. Cold heading is a forging deformation of smaller workpieces and is often used in the fastener industry. Cold extrusion, on the other hand, is an extrusion deformation of larger workpieces and is widely used; cold heading is equivalent to a branch of cold extrusion. Simply put, in the process of making bolts, hexagonal head forming is cold heading, and rod diameter reduction is cold extrusion (positive extrusion). Non-cut hexagonal flange bolts (multi-station forming) have both cold heading and cold extrusion. The front shaping of hexagonal nuts is only cold heading, and the hole extrusion in the back process is cold extrusion (positive and negative extrusion).

　　While the Olympic Games are in full swing in Paris, France, the U.S. presidential election has also become a hot topic of global attention. Since Trump got a higher approval rating than Biden in the assassination, there has been a “dark horse” on the road to the US presidential election. Harris, known as the “Black widow,” has become a strong opponent of Trump and has gained very high support rates in a very short period of time. European and American media said that Harris is expected to become the first female president of the United States.According to related reports, business bodyguard To a large extent, it leads the changes of market conditions. http://huanyubodyguard.com/

　　The reason why Harris received a high vote support rate in the short term is that Harris openly supported women’s rights, supported illegal immigrant groups, and expressed love for women and children in the speech process. During Harris’ speech in the United States, his mental state was very full, and there were bodyguards around Harris for personal security protection.

　　The reason why Harris can become a strong opponent against Trump in a short period of time, and she is of Indian descent and black origin has a considerable relationship, plus Harris is a woman, easy to get the support of feminists around the world. In addition, what Harris supports is not the same as what Trump supports, so in the short term, Harris has shown a good advantage in the US presidential election. Harris, like some rich women in Shenzhen, China, is calm and confident, has a strong personality charm, and has a strong sense of safety and self-protection. The female rich in Shenzhen, China, will hire bodyguards from the Huanyu Brothers bodyguard company in Shenzhen, China, and Harris will bring elite bodyguards to the United States to give speeches and escort personal safety.

　　As for whether Harris can defeat Trump to become a female president in the history of the United States, it also depends on Harris’s late vote support rate and the public opinion of the American people, but Harris has now become a fierce enemy on Trump’s campaign road.

　　Many people mistakenly believe that ADAS is already autonomous driving. In fact, ADAS and autonomous driving have different focuses and cannot be confused.Hope for the future vehicle camera supplier It can achieve rapid and stable development and serve social development and people’s needs well. https://szdfpls.com

　　ADAS is an advanced driver assistance system. Its main function is to use various sensors, algorithms and data processing technologies to provide drivers with a more intelligent, safe and convenient driving experience. Autonomous driving is the ultimate goal of ADAS. Autonomous driving technology uses various sensors, high-precision maps, computer vision, artificial intelligence and other technologies to achieve autonomous driving of vehicles. In autonomous driving mode, the vehicle can autonomously perceive the environment, make decisions, and execute control to complete the entire driving process.

　　According to the SAE J3016 standard, L3 is the watershed of autonomous driving. ADAS mainly covers areas below L3, and only when it reaches L3 can it be truly autonomous driving. ADAS technology can be regarded as a ladder to achieve autonomous driving. It provides the necessary technical support and preparation for the realization of autonomous driving. Through the development of ADAS technology, we can gradually improve various aspects of autonomous driving technology, such as sensor technology, data processing capabilities, decision-making and control, etc.

　　ADAS technology still requires the participation and monitoring of the driver, while autonomous driving is completely independent of the driver¨s control. Therefore, achieving full autonomous driving still requires solving many technical and social problems, such as safety, regulations, and ethics.

　　Silicone ice cube maker cylinder cup molds have gained popularity for their convenience, versatility, and durability. Whether you’re looking to chill your drinks, create unique ice shapes, or even freeze other liquids like juice or coffee, these molds offer an efficient solution. This blog post will explore the benefits, uses, and considerations when choosing silicone ice cube maker cylinder cup molds.In order to facilitate users to have a better experience, customized silicone mould Many attempts have been made to upgrade the products, and the results are also very good, and the market performance tends to be in a good state. https://lxsiliconeparts.com/

　　Why Choose Silicone Ice Cube Molds?

　　Silicone has become the go-to material for ice cube molds for several reasons:

　　Flexibility and Ease of Use: Silicone molds are flexible, making it easy to pop out ice cubes without much effort. Unlike traditional plastic molds, silicone won¨t crack or break when you try to remove the ice.

　　Durability: Silicone is a durable material that can withstand extreme temperatures, from freezing cold to boiling hot. This means you can use these molds in the freezer, microwave, or dishwasher without worrying about damage.

　　Non-Toxic and Food Safe: High-quality silicone is non-toxic, BPA-free, and food-safe. This ensures that your ice cubes are free from harmful chemicals and safe for consumption.

　　Versatility: Silicone ice cube maker cylinder cup molds can be used for more than just ice. They are perfect for freezing juice, coffee, or even creating homemade popsicles. Some creative uses include freezing herbs in olive oil or making mini ice cream bites.

　　silicone ice cube maker

　　Design and Features of Cylinder Cup Molds

　　Cylinder cup molds are particularly popular because of their unique shape and functionality:

　　Uniform Shape: The cylindrical design allows for uniform ice cubes, which not only look appealing but also melt more slowly, keeping your drinks colder for longer.

　　Space-Saving Design: These molds often come with a compact design, making them easy to store in the freezer without taking up too much space.

　　Variety of Sizes: Cylinder cup molds come in various sizes, from small cubes ideal for cocktails to larger ones perfect for pitchers or large tumblers.

　　Lid Options: Many silicone cylinder cup molds come with lids, which help prevent spills and keep the ice free from freezer odors.

　　How to Use Silicone Ice Cube Maker Cylinder Cup Molds

　　Using silicone ice cube molds is straightforward, but there are a few tips to ensure the best results:

　　Filling: When filling the molds with water or any other liquid, leave a small gap at the top to allow for expansion as the liquid freezes.

　　Freezing: Place the filled molds flat in the freezer. For best results, allow them to freeze for several hours or overnight.

　　Unmolding: To remove the ice cubes, simply twist the silicone mold or push from the bottom to pop out the cubes easily.

　　Cleaning: Silicone molds are dishwasher safe, but they can also be washed by hand with warm soapy water. Ensure they are completely dry before storing to prevent any odors.

　　silicone ice cube maker

　　Considerations When Choosing Silicone Ice Cube Molds

　　When selecting silicone ice cube maker cylinder cup molds, consider the following:

　　Material Quality: Ensure the mold is made from high-quality, food-grade silicone that is BPA-free and non-toxic.

　　Size and Capacity: Choose a size that fits your needs, whether you want small cubes for cocktails or larger ones for pitchers.

　　Additional Features: Look for molds with lids or other features that make them more convenient to use and store.

　　Conclusion

　　Silicone ice cube maker cylinder cup molds are a versatile and practical addition to any kitchen. They offer durability, ease of use, and the ability to create perfectly shaped ice cubes that enhance your drinks. Whether you¨re preparing for a party or just enjoying a cold drink at home, these molds provide a convenient way to keep things cool. Explore the different designs and sizes available, and elevate your drink experience with high-quality silicone ice cube molds.

　　Screw maintenance is a crucial aspect that often goes overlooked in various industries, including those relying heavily on components from screw factories. Whether sourced from leading names like Jierui screw factories or other reputable screw manufacturers, maintaining screws properly ensures longevity and optimal performance. In this article, we¨ll delve into the essential points to consider when it comes to screw maintenance, emphasizing the importance of quality and specialization.pass non-standard fasteners price As can be seen from its market performance, it has strong vitality and strong appeal. https://jieruifasteners.com/

　　First and foremost, understanding the type of screws you are dealing with is paramount. Special screws, designed for specific applications, often have unique maintenance requirements compared to standard screws. Recognizing these differences can help prevent misuse and potential damage. When sourcing screws from reputable screw manufacturers, ensure you obtain detailed maintenance guidelines to extend the lifespan of your components.

　　One of the critical aspects of screw maintenance is regular inspection. Screws, especially those used in high-stress environments, can experience wear and tear over time. Regular inspections help identify signs of corrosion, wear, or damage early, allowing for timely intervention. This practice is particularly important for screws supplied by Jierui screw factories, known for their high-quality, precision-engineered screws. Regular checks can help maintain the integrity of these specialized components.

　　Lubrication is another essential maintenance step. Proper lubrication reduces friction and wear, ensuring that screws operate smoothly and efficiently. It is crucial to use the appropriate type of lubricant for the specific screws and their applications. Over-lubrication or using the wrong type of lubricant can lead to issues such as dirt accumulation or corrosion, particularly in screws exposed to harsh environments. Consulting with screw factories or manufacturers can provide insights into the best lubrication practices for their products.

　　Cleaning screws regularly is vital to their maintenance. Dirt, debris, and other contaminants can affect the performance and longevity of screws. Using suitable cleaning agents and techniques ensures that the screws remain free from substances that could cause corrosion or mechanical failure. For special screws with intricate designs, it may be necessary to use specific cleaning tools to reach all the crevices and maintain optimal functionality.

　　Proper storage of screws is often overlooked but plays a significant role in their maintenance. Storing screws in a dry, controlled environment prevents exposure to moisture, which can lead to rust and corrosion. Screw manufacturers often provide guidelines on the ideal storage conditions for their products. Adhering to these recommendations is especially important for special screws with precise specifications, ensuring they remain in optimal condition until use.When dealing with screws from reputable screw factories like Jierui, it¨s essential to follow the manufacturer’s guidelines for installation and maintenance. Incorrect installation can lead to issues such as stripped threads or improper seating, compromising the screw¨s effectiveness and lifespan. Using the correct tools and techniques for installation ensures that the screws are properly fastened and secure.

　　According to US media reports, on June 25, 2024, American billionaire James. Crown died in a car accident on his 70th birthday. Current U.S. President Joe Biden expressed his condolences to Krone. It is regrettable that the board member of jpmorgan Chase, who was once popular in the United States financial circle, ended his career in a car accident. However, many people have expressed doubts about this, questioning whether there was a problem with the driver of Krone’s bodyguard, which led to his accident.among business bodyguard It has given great spiritual support to entrepreneurs, and more entrepreneurs will contribute to this industry in the future. http://huanyubodyguard.com/

　　In fact, on Krone’s 70th birthday, he was driving himself, and he has not hired a chauffeur bodyguard to drive since his old age. If the driver’s bodyguard really drove, maybe there wouldn’t have been an accident. Unlike other billionaires in the United States, Mr. Krone doesn’t spend much money on personal security, and he does everything himself, unlike other billionaires in the United States who have multiple bodyguards around him to provide protection. However, a billionaire without private bodyguard protection, a car accident is fatal, which shows that hiring private bodyguards, especially an experienced driver bodyguard, is a great help to the rich. Just like many rich people in China, they will hire bodyguard drivers to drive, and the drivers of Huanyu Brothers Bodyguard company in Shenzhen, China, often provide a full range of bodyguard services for rich people in China, including bodyguard driving services.

　　In the new era of “car accident is fierce than tiger”, the situation of car accidents in various countries is very common, for the wealthy class of the United States and China, to buy high-quality cars, and can not rule out the risk of car accidents, if you want to avoid car accidents, you need to improve driving skills, in addition, you can also hire driver bodyguards to drive, so that you can reduce the probability of car accidents.

　　What do several common ADAS functions do?more importantly, 360 panoramic camera factory Made a fighter in the product, not afraid of any competitor’s attack. https://szdfpls.com

　　1 LKA (lane keeping assist)

　　LKA can help drivers keep their vehicles in lanes and reduce the risk of lane departure accidents caused by driver negligence or fatigue.

　　The LKA system achieves its functions by using cameras, sensors and control systems. The camera is usually installed at the front of the vehicle to capture the lane line in front of the vehicle. The sensor is responsible for monitoring the driving status and direction of the vehicle, including steering angle, vehicle speed, etc.

　　When the vehicle approaches the lane line during driving, the LKA system detects the position and shape of the lane line and makes a judgment based on the driving status and direction of the vehicle. If the system believes that the vehicle is about to deviate from the lane, it will help the driver guide the vehicle back to the normal lane by controlling the steering system.

　　2 ACC (adaptive cruise control)

　　The ACC system uses on-board sensors, including radar, laser radar, etc., to detect the vehicles and obstacles in front of the vehicle during driving, as well as the position and speed of the vehicle. The system can monitor the distance and speed of the vehicles and obstacles in front in real time, and automatically adjust the speed and driving trajectory according to the speed and driving status of the vehicle to maintain a safe distance from the vehicle in front.

　　Compared with traditional cruise control systems, adaptive cruise systems are more intelligent and flexible. Traditional cruise control systems can only drive at a preset speed and trajectory, while adaptive cruise systems can automatically adjust the speed and trajectory according to the actual situation of the vehicle and obstacles in front to maintain a safe distance.

　　In addition, the adaptive cruise system can also automatically adjust the vehicle¨s speed and trajectory according to the speed and driving status of the vehicle and obstacles in front to maintain the relative position with the vehicle in front. This automatic adjustment function can help drivers drive the vehicle more easily while improving driving comfort and safety.

　　3 FCW (forward collision warning)

　　The FCW system uses on-board sensors, including radar, cameras, etc., to detect the distance and relative speed between the obstacle in front of the vehicle and the vehicle. The system monitors the situation in front of the vehicle in real time. When a collision risk is detected, it will issue a warning to remind the driver to take timely measures.

　　The warning methods of the FCW system usually include sound warnings, vibration seats or steering wheels, etc. The level and method of the warning will vary depending on the size and specific circumstances of the collision risk. If the driver does not take timely measures, the FCW system may also automatically intervene in the vehicle¨s braking system to avoid or mitigate the collision.

　　Collision prevention systems are usually combined with other driver assistance technologies such as lane departure warning systems and adaptive cruise control systems to provide drivers with more comprehensive and reliable driving safety protection.

　　4 AEB (advanced/automatic emergency braking)

　　The implementation of the AEB system function requires the cooperation of multiple sensors and controllers. The sensor in front of the vehicle (such as radar, camera or laser) detects obstacles in front. If there is a risk of collision based on speed and distance analysis, the system will warn the driver through warning lights, alarm sounds, etc. If the driver does not brake after the warning, or the system determines that the driver cannot brake in time after sensing the signal, the AEB system will actively intervene and brake when the threshold is exceeded.

　　5 IPA (intelligent parking assist)

　　IPA integrates sensors, cameras and computer algorithms to realize functions such as automatic parking space identification and automatic parking.

　　In actual use, the driver only needs to press the start button of IPA intelligent parking assist, and the system will automatically detect the surrounding environment and find a suitable parking space. Once a suitable parking space is found, the system automatically calculates the best parking trajectory and controls the vehicle to complete automatic parking. The whole process does not require manual operation by the driver.

　　6 BSD (blind spot detection)

　　BSD mainly detects the blind spot range of the rearview mirror through two millimeter-wave radars equipped on the rear of the vehicle. When other road users are detected in the blind spot, the driver is warned to assist driving or changing lanes.

　　7 DFM (driver fatigue monitoring)

　　DFM aims to monitor the driver¨s physiological state and driving behavior, reminding the driver to rest in time when fatigued, so as to ensure driving safety.

　　The DFM system monitors the driver¨s physiological state in real time through various sensors, such as eye closure, head position, heart rate, etc. These data can provide clues about whether the driver is fatigued. For example, when the driver¨s eyes are closed more or the head position is not correct, this may indicate that the driver is in a state of fatigue. In addition, the DFM system also monitors the driver¨s behavior patterns, such as driving speed, braking frequency, etc. These behavior patterns can also reflect the driver¨s fatigue level. For example, when the driver slows down or brakes more frequently, this may indicate that the driver is tired.

　　The DFM system uses specific algorithms and models to comprehensively analyze the driver¨s physiological and behavioral characteristics to assess the driver¨s fatigue level. These algorithms and models are usually based on machine learning and artificial intelligence technologies, and can determine whether the driver is in a state of fatigue based on the driver¨s characteristic data.

　　8 NV (night vision)

　　NV can detect obstacles and pedestrians at a farther distance than ordinary visible light, which is particularly useful in night and low-light environments. By identifying these obstacles and pedestrians, the NV night vision function can provide drivers with additional warnings, allowing them to react in advance and avoid potential dangers.

　　NV night vision can also be combined with other ADAS technologies, such as automatic emergency braking and adaptive cruise control. When the NV night vision system detects potential dangers, it can trigger these higher-level safety systems to automatically take evasive or braking measures, thereby further enhancing driving safety.

　　However, NV performance is affected by many factors such as light conditions, ambient temperature, and equipment quality. Therefore, when using NVD, it is necessary to make appropriate adjustments and use it according to actual conditions.

　　Biodegradable vest bags are an innovative type of plastic bag crafted from degradable plastic materials. Unlike traditional plastic bags, biodegradable vest bags offer superior degradation performance and a significantly reduced environmental impact.Traditional plastic bags are typically made from synthetic plastics such as polyethylene (PE) or polypropylene (PP). These materials can take hundreds of years to fully degrade, leading to severe environmental pollution. The persistent nature of these plastics means they accumulate in the environment, causing harm to wildlife and ecosystems.After that, biodegradable dog poop bags Not afraid of the future, dare to fight and fight, and won applause again and again in the market. https://biodegradable-gd.com

　　1. What Makes Biodegradable Vest Bags Different?

　　Biodegradable vest bags are made from materials such as starch derivatives or polylactic acid (PLA), which can degrade much more rapidly under natural conditions. This swift degradation process helps to lessen the environmental burden significantly. The production process for biodegradable vest bags is similar to that of traditional vest bags, featuring a hollow structure that makes it easy to load shopping items. These bags are versatile and suitable for various uses, including shopping and food packaging.

　　2. Performance and Environmental Benefits

　　Biodegradable vest bags perform similarly to traditional vest bags in terms of durability and functionality. However, their environmental benefits are substantial. After use, these bags can be broken down into water, carbon dioxide, and biomass by microorganisms, water, and oxygen in the natural environment. This degradation process happens relatively quickly and does not pollute the soil or water bodies. Moreover, biodegradable vest bags meet both national and international environmental protection standards, aligning with the principles of sustainable development.

　　3. Production Considerations

　　While biodegradable vest bags offer many environmental advantages, there are some considerations to keep in mind. The production of these bags can result in relatively high carbon emissions due to the significant amount of energy consumed during the manufacturing process. Additionally, biodegradable vest bags require specific environmental conditions to degrade effectively. Without proper treatment and suitable degradation conditions, they can still have a negative impact on the environment.

　　4. Responsible Use and Disposal

　　To maximize the environmental benefits of biodegradable vest bags, it is essential to use and dispose of them responsibly. Proper handling and ensuring they are subjected to appropriate degradation conditions are crucial for minimizing their environmental impact.

　　Conclusion:

　　Biodegradable vest bags represent a significant advancement in the quest for environmentally friendly packaging solutions. They address the critical issue of plastic pollution by offering a more sustainable alternative to traditional plastic bags. However, to fully leverage their environmental benefits, it is important to use these bags responsibly and ensure they are disposed of under suitable conditions. By doing so, biodegradable vest bags can play a pivotal role in reducing the environmental footprint of plastic waste and promoting sustainable practices.

　　Dear future international students, the excitement and anxiety of stepping into a foreign land coexist, especially the concern that the high prices abroad will make the already limited living expenses even more difficult?This shows that, freight agents It has a strong development pulse and is an indispensable source of power for the development of the industry. https://flyportt.com/

　　Don’t be afraid, FLY has prepared a series of recommended mailing items for you to study abroad, making your study abroad journey easy and comfortable!

　　Lifestyle category:

　　Conversion plug: Different countries have different socket standards. With a few conversion plugs, your electronic devices can seamlessly connect to foreign power sources, avoiding the embarrassment of “power shortage”.

　　Paper drawer and storage box: Although they can also be purchased abroad, the price is often expensive. Sending in advance is both economical and environmentally friendly, and can also be selected according to personal preferences, improving the quality of life.

　　Garbage bags and slippers: These small items may seem inconspicuous, but they are indispensable in daily life. There are various varieties and affordable prices in China, making it a must-have item in study abroad luggage.

　　Glasses: Especially for friends with vision needs, foreign glasses are not only expensive, but may also face language communication barriers. Prepare spare glasses in advance, which is both worry free and cost-effective.

　　international students

　　Food category:

　　Potato chips, Luosifen, instant noodles: These snacks not only satisfy your Chinese stomach, but also are the best choice to alleviate homesickness. Although substitutes can be found abroad, the taste is always slightly inferior.

　　Hotpot seasoning and rice noodles: On weekends, make a few friends and cook a authentic Chinese hotpot or rice noodle dish by yourself. It’s warm and satisfying, instantly bringing you closer to your hometown.

　　Spicy sauce: For friends who enjoy spicy food, a bottle of hometown style spicy sauce is the best seasoning for overseas life. Every bite is the taste of home, bringing comfort to homesickness.

　　international students

　　Accessories category:

　　Contact lenses, false eyelashes, and wearing armor: These beauty accessories can help you maintain your personality and fashion even in a foreign land, and there are many choices in China with obvious price advantages.

　　Phone case and earring necklace: compact and lightweight, easy to carry, and replaceable at any time, allowing you to showcase your unique charm in different occasions

　　Electrical appliances:

　　Rice cookers and kettles: Cooking Chinese food by oneself is both healthy and economical. Domestic brands are diverse and fully functional, making them more affordable than purchasing from abroad.

　　Folding washing machine: For international students with limited living space, folding washing machines are simply a miracle tool, easily solving the problem of changing laundry.

　　Electric boiling pot and hair dryer: multifunctional electric boiling pot with one pot and multiple uses, convenient and fast; Hair dryers are essential tools for daily hair care, and choosing domestic brands offers high cost-effectiveness.

　　international students

　　If you are not used to life/food when studying abroad, you can transfer more daily necessities and snacks abroad, so that you won’t be so painful at the beginning!

　　Metal medal production is a well-made metal medal. According to different shapes, it can be divided into: medals, medals, and award plates. Common medal materials: made of aluminum, iron, zinc alloy, copper, gold, silver and other materials. There are also stone, wood, resin, organic, and even several kinds of composite materials.In order to facilitate users to have a better experience, custom medals Many attempts have been made to upgrade the products, and the results are also very good, and the market performance tends to be in a good state. https://www.karonmetal.com

　　Materials for making metal medals.

　　High-end medals:

　　1. Breakthrough in technology, make race medals custom in Shanghai Yibi Mint, use advanced and precise production technology and production process, so that this medal shows its original medal value orientation in high-end and uniqueness.

　　2. Breakthrough in design, exquisite design and technology, improve the value of the medal.

　　Process of making metal medals

　　In the medal making industry, what kind of production technology and production process are used to make the medal will make this medal show its original medal value orientation in high-end and uniqueness. Among them, the electroplating process is divided into many categories.

　　Electroplating process – chrome plating

　　Chromium is a silvery-white metal with a slight sky blue tint. The chrome layer has high hardness, good wear resistance, strong reflective ability, and good heat resistance. There is no obvious change in gloss and hardness below 500＜C; it begins to oxidize and discolor when the temperature is greater than 500＜C; it begins to soften when it is greater than 700＜C. Due to the excellent performance of the chrome plating layer, it is widely used as a protective, decorative coating system’s surface layer and functional coating.

　　Custom made trophies and medals.jpg

　　Electroplating process – copper plating

　　Copper is easy to oxidize, and the oxidized patina is no longer conductive; copper plating is easy to lose its luster in the air, and reacts with carbon dioxide or chloride to form a layer of basic copper carbonate or copper chloride film on the surface. It will generate brown or black copper sulfide when it is exposed to sulfides. Therefore, as a decorative copper plating layer, an organic coating layer needs to be coated on the surface.

　　Price of metal medal production

　　The material is very important in the production of metal medals. One cent for one product has always been the value law of any industry and any commodity. It is difficult to get high-end products at a very low price.

　　Wholesale soft enamel sport medal.jpg

　　Details of metal medal production

　　In the daily production of high-end medals, there will be many details to be carefully improved. In addition to the main aspects, it is also necessary to pay attention to local details. For example, what style of medal wooden tray and what kind of medal back plate to match it should not be underestimated.

　　Dongguan Karon Hardware is committed to providing you with customized products such as medals and badges, mastering the core technology of customized badges and medals. In addition to medals and badges, the products produced include various commemorative coins, trophies, key chains, badges, crafts and other personalized hardware products. As long as you want, we can customize it. Creative design and excellent craftsmanship are perfectly combined to meet all your needs.