Yearly Archives: 2024

　　When we choose a mobile phone, the screen quality is the first appeal of many users. As the only image export, mobile phone manufacturers are constantly iterating over the quality of the mobile phone panel every year. The selection of the mobile phone screen depends on the four parameters: resolution, refresh rate, touch sampling rate and screen material.

　　Resolution and refresh rate determine the visual effect.

　　At present, the screen pixels of the thousand yuan machine are basically 1080P+60Hz, and such an entry panel has been used for nearly ten years. At the price of 1,500 yuan, you can basically buy a screen with a high brush of 90Hz or 120Hz, while at the high end of 3,000 yuan or more, you can basically equip it with 2K resolution and refresh rates of 120Hz, 144Hz or even higher.

　　If we only look at the pixels, the resolution of 1080P is basically enough, and the resolution of 2K has more or less high requirements for the battery life of the mobile phone. Users have already failed to meet the screen with 60Hz refresh rate, and the high screen of 120Hz is gradually solving the cost problem. In recent years, the popularity of mid-range computers has basically been completed.

　　So simply use the price of mobile phones to popularize the corresponding panels:

　　1000-1500 yuan: 1080P+60Hz1500-2500 yuan: 1080P+90, 120Hz2500-3000 yuan: 2K+120Hz3000 yuan or more: 2K+144Hz or higher.

　　Gamers must watch: touch sampling rate

　　The sampling rate is more accurate to locate the finger on the screen of the mobile phone. When playing a game, the mobile phone with high sampling rate will also receive the finger instruction faster, thus being one step ahead of others in the game.

　　The hand sends various instructions to the mobile phone by sliding the screen. The higher the screen sampling rate, the higher the accuracy of the instructions, and there will be no broken touch. Generally, the screen with higher sampling rate has more obvious advantages in the game.

　　That is to say, the higher the touch sampling rate, the faster your reaction when you touch the screen during the game, and you will be able to throw skills earlier than other players, thus forming operations in the game faster.

　　Generally, the parameter of touch sampling rate will be introduced on the introduction page of mobile phone, and the higher this value is, the better. Generally, the touch sampling rate of game mobile phones is relatively high, and some manufacturers claim that their screens are “e-sports screens”, which is also relatively high. The instantaneous touch sampling rate generally exceeds 1000Hz.

　　Screen material determines the quality of imaging.

　　Finally, we talked about the screen material, which is the same as when we went to the home appliance market to buy a TV. When a variety of TVs are put together, you can easily compare which TV has better color and higher quality.

　　At present, the screen materials of mobile phones are basically TFT, LCD, AMOLED and Micro OLED.

　　TFT: currently used less, basically distributed in 100-yuan machines, with high power consumption, low sampling rate and poor hair color. It is facing the elimination of LCD, the main force of entry-level “cost-effective” mobile phones, with high penetration rate and low cost. AMOLED, which is developed from OLED, has high contrast, good hair color, power saving, refresh rate and other values, and high Micro OLED, which has high color gamut and fast response speed, but high cost and is generally very high.

　　Random screen materials from second to best, the choice of the above screen materials basically corresponds to the price of the mobile phone. Generally, the entry-level to mid-range models within 2,000 yuan are LCD screens, while the flagship model AMOLED is basically standard, and Micro OLED is the top screen ceiling.

　　For example, the whole iPhone12-14 uses OLED screens, while the previous iPhone11 used LCD screens. If you have friends around you who happen to be using these models, you can see the difference between them.

　　Every woman wants to become a small V-face like a star. With the development of medicine, many methods can make people lose face quickly, such as osteotomy. The effect of this operation is permanent. What are the common surgical methods?It is reported that, 台北削骨 The data performance is getting better and better, which is of great reference value and is likely to become the vane of the industry. https://easycode.com.tw/?p=557

　　What are the methods of osteotomy?

　　1. Mandibular angle surgery The Chinese character face and the square face are called mandibular angle hypertrophy, which makes the face look very wide and not photogenic. If the five senses don’t match, the whole person looks old and rustic. It can be treated by mandibular angle surgery, which is mainly divided into mandibular resection and cortical resection. Mandibular resection is divided into local resection and total resection. The posterior part of mandibular angle is wide, so mandibular resection can be chosen. If the mandible is not too big, cortical resection can be suggested. Mandibular angle surgery can be done for people with obvious hypertrophy and valgus of mandibular angle, unilateral or bilateral prominent mandibular angle, bilateral asymmetry and uncoordinated ratio of upper and lower width of face.

　　2, zygomatic surgery, zygomatic bone and zygomatic arch are the bone support in the middle of the face. Their size and shape determine the width of the face and the curvature of the side, but also affect the appearance and contour of the face. When the zygomatic bone is too high, it can be solved by zygomatic surgery, which is mainly divided into zygomatic grinding and zygomatic pushing. The former is to make an incision in the mouth and grind the prominent cheekbones with special bone grinding equipment to reduce the protruding volume of the cheekbones, and the zygomatic arch can be completely preserved, which is suitable for people whose front cheekbones are not wide but whose side cheekbones are prominent.

　　The latter is to make an incision from the mouth in front, cut off the frontal cheekbones and remove some bones. At the rear, an incision is made according to the hairline to cut off part of the cheekbones and remove part of the bones, so that the whole cheekbones are pushed inward to a suitable position, and then the metal is used for strong internal fixation, which is suitable for people with prominent and wide cheekbones, but the technology is complicated and requires high doctors.

　　With the development of science and technology, smart phones have become an indispensable part of our lives. As one of the most intimate parts with us, the quality and performance of mobile phone screen have attracted more and more attention from consumers. Recently, Samsung has launched a mobile phone screen inquiry website called “OLED Finder”, which allows us to easily know what kind of mobile phone screen we have.

　　First of all, this website provides very detailed information, including screen parameters of various brands and models of mobile phones. By inputting the phone model or camera arrangement, we can quickly find the corresponding screen type. This is undoubtedly a good reference tool for friends who want to buy a new mobile phone.

　　In addition, according to Samsung’s official news, the database of this website will be continuously updated in the future, and more mobile phone models will be added for your inquiry. It is not limited to smart phones, but may also cover other electronic products such as laptops and tablets. In this way, we can understand the screen characteristics of different devices more comprehensively, so as to make more informed choices.

　　Of course, in addition to being convenient for users to inquire, this website also helps to improve the transparency of the whole industry. When many consumers buy mobile phones, they often don’t know enough about the screen, which leads to confusion in the process of purchasing. With the existence of this website, everyone can know more about the screen technology of various brands, so as to make a choice that is more in line with their own needs.

　　In a word, this mobile phone OLED screen inquiry website launched by Samsung provides us with a simple and powerful information platform. It not only helps us better understand the characteristics of our mobile phone screen, but also gives us a deeper understanding of the whole industry. I believe that in the future, this website will continue to improve and develop and become our right-hand man in daily life.

　　In this era of rapid development of AI technology and increasing penetration into all aspects of our lives, understanding and mastering AI is no longer an option, but a necessity. The sooner you experience AI, the more you can take the initiative. “Simple AI” provides users with a free and low-threshold AI tool experience, and can create creative works without professional knowledge.

　　Osteotomy is an operation to change the face shape by removing a part of the cheekbone.in fact 削骨失 It is more and more welcomed by our customers, and its market performance is gradually improving. https://easycode.com.tw/?cat=1

　　Osteotomy is mainly to make an incision in a hidden part, and then use a professional mold to remove the bone, which can narrow the bone, but it has certain risks when doing the operation, so it is necessary to choose a regular hospital, and the doctors have rich experience, which can reduce the occurrence of adverse reactions and improve the success rate of the operation. If the operation is not done properly, there may be uneven skin.

　　After the operation, you need to pay attention to a reasonable diet, mainly light food, and you can eat more foods rich in vitamins and protein, which can help you recover.

　　1. Long press the information, and you will see which software is pushed. Open this software, find the settings, and close the push. You can also turn off the push permission of the software in the application permission of the mobile phone.

　　2. If the phone is in the lock screen, it will also push hot information. At this time, you can find the software, then open the software settings and turn off the “lock screen reading switch”.

　　3. How to close the browser to recommend hot information: Open the browser, click the menu option in the upper right corner to expand the menu list, and click the Settings button. You can close the hot information through the settings in the settings interface. After entering the settings interface, click the navigation menu on the left and click Lab. Hot information can be found in the lab. You can set the browser not to automatically push hot information by checking the check box in front of the hot information.

　　4. Method of closing the negative screen page of the mobile phone: First, randomly enter a mobile phone desktop, and hold it down for a long time to enter the interface management page, and then click the settings in the lower right corner of the page to find “negative screen” and close it. You can also set some other functions about the mobile phone desktop in this setting.

　　Facial osteotomy is a common and risky plastic surgery. Of course, even if the risk is high, there are still many people who are eager for this kind of operation, because facial bone cutting can change a person’s face shape very well and make it look more exquisite and beautiful. After facial osteotomy, there are also some precautions. Below, I will introduce you to the relevant knowledge of facial bone cutting!Since then, more and more people have found that 台北削骨LU The value of, thus affecting the choice of many people. https://easycode.com.tw/?p=1

　　A brief introduction to the operation

　　Jaw grinding and bone cutting is a plastic surgery that cuts the inside of the mouth near the mandibular angle, removes all the inner and outer layers of the redundant mandible, and then grinds and thins the edge of the external plate of the redundant mandible. Plastic surgery opens the facial skin and muscles from the mouth, separates the muscles from the periosteum, exposes the bone parts that need to be ground, draws an osteotomy line according to the designed amount of bone cutting, and finally uses a long-handled swing saw to remove the mandibular angle according to the osteotomy line. Generally, the range of 3-4 cm long and 1-2 cm high can be cut off in an arc shape, and the edges and corners after osteotomy can be smoothed. Achieve the effect of face-lifting.

　　Second, the risk of surgery

　　Many people modify facial bones to change their faces. There are two ways to modify bones, one is to grind bones, the other is to chisel away some bones with a professional medical chisel, and the latter method is no longer used in clinic.

　　If the patient’s cheek is hypertrophy, part of the inner masseter muscle will be removed, or part of the buccal fat pad will be removed by slightly separating it to the outside. In this process, it is inevitable that there will be asymmetry in protecting nerve and blood vessels and osteotomy in the operation of grinding cheeks and cutting bones. Bone grinding surgery may lead to massive bleeding or nerve damage, making the face feel numb and even facial paralysis.

　　Third, matters needing attention

　　1. First of all, we’d better stay in hospital for about 3 days after operation.

　　2. It is best to squeeze and wrap the wound for about a week after operation, which can effectively prevent discomfort and swelling after operation.

　　3. You can’t massage your face within three months after the operation, and try to touch your face as little as possible.

　　4. It is best to eat some liquid food one week after the recovery period of bone grinding and plastic surgery, and pay attention to avoid some spicy food and hard biting food within three months.

　　The above is the introduction about facial osteotomy. Of course, since it is a high-risk operation, we must choose a regular and reliable hospital before the operation, so as to avoid all kinds of sequelae and side effects and ensure the safety of beauty seekers!

　　Although many manufacturers will claim how hard the screen is, in fact, every mobile phone user will face the problem of screen scratches. Many people will put a protective film on their mobile phone screens to protect them, which will not only cost money, but also affect the look and feel.

　　If you don’t film it, there will be many scratches on the screen of the mobile phone soon. Although it generally does not affect the normal use, the experience is reduced to a certain extent, even when the second mobile phone is sold, it will affect the price.

　　According to the latest forecast of CCS Insight, a global technology research and consulting company, smartphone manufacturers will begin to produce smart phones with the function of self-repairing screen scratches within five years.

　　Ben Wood, chief analyst of CCS Insight, believes that this is not a story in science fiction, it can be done, and the biggest challenge is to set expectations for it correctly.

　　He also said: We are not talking about how the broken screen is restored. This is something that magic can do. What we are talking about is the self-repair of scratches on the screen surface, thus prolonging the service life of the equipment. “

　　The core of this technology is a brand-new material, which can cover the screen surface with a coating. Specifically, this coating is composed of a special material. When it is scratched, it will trigger a chemical reaction and produce a new material. When exposed to air, this new material will react and fill the defect, so that the scratch is repaired.

　　Wood finally pointed out that this technology needs further research and development, and interdisciplinary cooperation and innovative materials science are needed. Nevertheless, I still think it is possible to commercialize this technology in the next five years. “

　　In fact, various manufacturers have been studying the technology of self-repairing screens. In 2017, Motorola applied for a patent for a screen made of shape memory polymer; In 2019, Huawei also applied for a patent entitled “A method and equipment for repairing glass scratches”; Apple has also applied for a patent for a foldable iPhone, and its display can be repaired by itself when it is damaged.

　　Facial osteotomy is a common and risky plastic surgery. Of course, even if the risk is high, there are still many people who are eager for this kind of operation, because facial bone cutting can change a person’s face shape very well and make it look more exquisite and beautiful. After facial osteotomy, there are also some precautions. Below, I will introduce you to the relevant knowledge of facial bone cutting!more importantly, 削骨案例 Made a fighter in the product, not afraid of any competitor’s attack. https://vline.com.tw/

　　A brief introduction to the operation

　　Jaw grinding and bone cutting is a plastic surgery that cuts the inside of the mouth near the mandibular angle, removes all the inner and outer layers of the redundant mandible, and then grinds and thins the edge of the external plate of the redundant mandible. Plastic surgery opens the facial skin and muscles from the mouth, separates the muscles from the periosteum, exposes the bone parts that need to be ground, draws an osteotomy line according to the designed amount of bone cutting, and finally uses a long-handled swing saw to remove the mandibular angle according to the osteotomy line. Generally, the range of 3-4 cm long and 1-2 cm high can be cut off in an arc shape, and the edges and corners after osteotomy can be smoothed. Achieve the effect of face-lifting.

　　Second, the risk of surgery

　　Many people modify facial bones to change their faces. There are two ways to modify bones, one is to grind bones, the other is to chisel away some bones with a professional medical chisel, and the latter method is no longer used in clinic.

　　If the patient’s cheek is hypertrophy, part of the inner masseter muscle will be removed, or part of the buccal fat pad will be removed by slightly separating it to the outside. In this process, it is inevitable that there will be asymmetry in protecting nerve and blood vessels and osteotomy in the operation of grinding cheeks and cutting bones. Bone grinding surgery may lead to massive bleeding or nerve damage, making the face feel numb and even facial paralysis.

　　Third, matters needing attention

　　1. First of all, we’d better stay in hospital for about 3 days after operation.

　　2. It is best to squeeze and wrap the wound for about a week after operation, which can effectively prevent discomfort and swelling after operation.

　　3. You can’t massage your face within three months after the operation, and try to touch your face as little as possible.

　　4. It is best to eat some liquid food one week after the recovery period of bone grinding and plastic surgery, and pay attention to avoid some spicy food and hard biting food within three months.

　　The above is the introduction about facial osteotomy. Of course, since it is a high-risk operation, we must choose a regular and reliable hospital before the operation, so as to avoid all kinds of sequelae and side effects and ensure the safety of beauty seekers!

　　With the popularity of smart phones, especially the increasing dependence of young people on mobile phones, screen anxiety has become a problem worthy of attention. Recently, some media reported that Luke Martin, a 16-year-old Canadian boy, chose a “stupid mobile phone” with extremely limited functions, which can only make calls, send messages and view maps, so as to reduce screen time and avoid social media addiction. This behavior just caters to the rising trend of “stupid mobile phones” in Europe and America.

　　Martin said that he had relied too much on social media before and was worried that he could not extricate himself from it. The “fear of missing” brought by social media made him decide to make a change. He said: “Friends who use smart phones often spend up to four or five hours in front of the screen every day. I used to do the same. Now I only use it (mobile phone) for about 20 minutes every day, which is really good. “

　　The report also pointed out that many parents also began to favor “stupid mobile phones”, not only for their children, but also for themselves and other family members. Lizzie broughton, who has a 5-year-old son, bought herself an old Nokia flip phone. She said: “This gives me the opportunity to adjust my living habits and spend more quality parent-child time with my son.” She plans to buy her son a similar mobile phone when he can use it. “It is not a good idea to let children use smartphones from the beginning.”

　　In addition to “stupid mobile phones”, some innovative products have also emerged. For example, the “unplugged” device can prevent the startup of mobile phone application software and help users control the use time. Some developers have also introduced mobile phones with monotonous operation interface and limited functions, aiming at reducing users’ screen time.

　　However, the rise of the “stupid mobile phone” trend is not easy to change people’s habit of using mobile phones for a long time. The advertising profit of social media is huge, and many enterprises may lack the motivation to push consumers to change.

　　There are obvious differences between bone grinding and bone cutting in operation mode, operation principle and application scope.Today, people are interested in 台北削骨失 There are also many dependencies, and the expectations for products are getting higher and higher. https://easycode.com.tw/?p=557

　　1. Different scope of application: Bone grinding surgery is suitable for people with low demand for beauty, mainly aiming at the adjustment of cheekbones. Osteotomy is suitable for people with obvious bone deformities, large facial bones and high cosmetic requirements. It can change the facial skeleton structure and achieve more obvious cosmetic effect.

　　2, the surgical principle is different: the surgical principle of bone grinding surgery is to remove part of the cheekbones, which can generally change the face slightly. However, osteotomy is mainly to remove redundant bones, and the change of face shape is more obvious.

　　3, different surgical methods: bone grinding surgery is often done after local anesthesia, making a small incision in the mandible, and removing some bones through subperiosteal stripping. However, osteotomy often eliminates some cheekbones by making an incision in the mouth after general anesthesia.

　　It should be noted that when choosing bone grinding or bone cutting surgery, you should go to a regular hospital for related surgery. If you feel unwell after operation, you should see a doctor in time and treat it actively to avoid delaying your illness. Choosing a professional doctor for surgery can reduce the risk of surgery and achieve better results.