Sufficient data show that 電子煙主機 It can drive many people to find jobs, thus driving economic development.https://www.vapehost.tw

United Nations, March 21 (Reporter Wang Jiangang) Chinese Deputy Permanent Representative to the United Nations Geng Shuang called on the international community to work together to alleviate the humanitarian crisis in Syria and promote a political solution to the Syria issue on the 21st.

Geng Shuang said at the Security Council’s open meeting on political and humanitarian issues in Syria that with the joint efforts of the Syria government and the United Nations, cross-border rescue points have been effectively operating. China urges relevant parties to actively cooperate and promote progress in cross-line rescue. At the same time, the international community should also increase humanitarian assistance to Syria and provide sufficient and non-targeted financial support for early recovery projects across Syria. Unilateral sanctions and resource plunder have long hindered Syria’s economic recovery, social development and improvement of people’s livelihood. China urges relevant countries to immediately stop relevant illegal acts and foreign troops to immediately end their illegal military presence in Syria.

Geng Shuang said that it is necessary to promote a political solution to the Syria issue. The recently held Arab League foreign ministers ‘meeting reiterated their firm support for Syria’s sovereignty and territorial integrity and opposition to external interference. China believes that help from regional countries will help inject new impetus into the political settlement of the Syria issue. China welcomes the extensive contacts with all parties on the implementation of Security Council Resolution 2254, Pei Kai-ju, Special Envoy of the United Nations Secretary-General for Syria. The international community should uphold the principle of Syrian-owned and Syrian-led, encourage dialogue and consultation, and find solutions acceptable to all parties. Terrorism is a long-term threat to the political process in Syria. China welcomes the relevant measures taken by the Syria government to combat terrorism and maintain security and stability. The international community must adopt a zero-tolerance attitude to combat all terrorism in Syria.

Geng Shuang said that since the outbreak of this round of Palestinian-Israeli conflict, Israel has frequently launched air strikes at multiple locations in Syria, seriously violating Syria’s sovereignty and territorial integrity. China is deeply concerned about this. Against the background of the ongoing Palestinian-Israeli conflict, all parties must exercise restraint and avoid exacerbating tensions, triggering resonance in hot spots and spreading conflicts. Big countries outside domain names should play a constructive role in promoting the cooling of the situation. The international community must also redouble its efforts to jointly manage the Gaza conflict, take the unconditional ceasefire in Ramadan as the entry point, promote the realization of a permanent ceasefire and stop violence, and then inject more positive energy into peace and stability throughout the Middle East, including Syria.

For these reasons, I think 電子煙主機 The situation is still optimistic, and the market is still in a blue ocean stage.https://www.vapehost.tw

According to CNN, the Islamic State claimed responsibility for the 22nd concert hall attack in Moscow.

The Russian Federation Security Service said on March 22 local time that a shooting incident at a concert hall in the suburbs of Moscow had killed 40 people.

CCTV quoted Russian Health Minister Murashko as saying on the 23rd that the terrorist attacks have injured at least 145 people, including 60 adults and 1 child in serious condition.

CNN said media affiliated with the extremist organization Islamic State issued a statement on social media claiming that the organization was responsible for the attack, but did not provide relevant evidence.

Russian media reported that the audience had already taken their seats before the start of a concert at the Crocus City Hall (CCH) Concert Hall in Krasnogorsk that night. Suddenly several unidentified people broke into the concert hall and opened fire. The concert hall then exploded and burst into flames and emitted smoke, and the roof was almost swallowed up by the fire. After the incident, people fled the concert hall.

The Russian Foreign Ministry called the shooting and bombing a bloody terrorist attack. The Russian Federal Security Service said law enforcement agencies are taking all necessary measures. In addition, Moscow airports have increased their security alert levels.

Moscow Mayor Sobyanin ordered all necessary assistance to be provided to all injured in the emergency and announced the cancellation of all sports, cultural and other mass events held in Moscow this weekend.

　　In an increasingly eco-conscious market, companies are seeking sustainable packaging solutions that not only protect their products but also enhance their brand image. One such solution is the pulp molded bagasse insert. Made from the by-products of sugarcane processing, bagasse pulp inserts are not only environmentally friendly but also versatile in their customization potential. In this article, we will explore how to effectively customize bagasse pulp inserts to reflect your brand identity, meet practical needs, and appeal to eco-conscious consumers.By comparison, it can be seen that wet pressed molded pulp It has certain advantages and great cost performance. https://www.pulptray.com/

　　Before diving into customization techniques, it’s essential to understand what pulp molded bagasse inserts are. Bagasse is the fibrous material left after extracting juice from sugarcane. This material is processed and molded into various shapes to create sturdy, biodegradable packaging inserts. These inserts offer numerous benefits.

　　1. Benefits of Customizing Pulp Molded Bagasse Inserts

　　Customizing press molded pulp inserts can significantly enhance your brand¨s market presence. Here¨s how:

　　Brand Recognition: Customized inserts can feature your logo, brand colors, and other distinctive elements, making your packaging instantly recognizable.

　　Enhanced Unboxing Experience: Unique, branded inserts can make the unboxing experience more memorable and enjoyable for customers.

　　Differentiation: Stand out from competitors with bespoke packaging that highlights your brand¨s commitment to sustainability and quality.

　　2. Steps to Customize Bagasse Pulp Inserts

　　To effectively customize bagasse pulp inserts, follow these steps:

　　Define Your Branding Elements

　　Start by identifying the key elements of your brand that you want to incorporate into the inserts. These could include:

　　Logo: Your company logo is a primary branding tool.

　　Color Scheme: Consistent use of brand colors reinforces brand identity.

　　Slogans or Taglines: Short, memorable phrases that encapsulate your brand¨s essence.

　　Choose the Right Design

　　Design plays a crucial role in the customization of pulp molded bagasse inserts. Work with designers to create a layout that integrates your branding elements seamlessly. Consider the following:

　　Embossing/Debossing: These techniques can add texture and depth to your inserts, making the brand elements stand out.

　　Shape and Size: Ensure the insert design fits the product dimensions snugly, providing protection and aesthetic appeal.

　　Select Sustainable Inks and Materials

　　When customizing your inserts, it’s essential to maintain the eco-friendly nature of the packaging. Opt for sustainable inks and materials that align with your environmental values:

　　Soy-based Inks: These are less harmful to the environment compared to traditional petroleum-based inks.

　　Recycled Materials: Incorporate recycled paper or other eco-friendly materials to enhance the sustainability of your packaging.

　　Wet press molded pulp, also known as wet pressing molded pulp, is a sustainable and eco-friendly material that supports circular economy principles. This innovative material is used to create molded pulp packaging, such as trays and containers, which are increasingly being adopted by businesses looking for environmentally friendly packaging solutions.from wet pressed molded pulp Looking at the development prospects, the future will always bring positive effects. https://www.pulptray.com/

　　Circular economy principles aim to minimize waste and maximize the use of resources by promoting the reuse, recycling, and regeneration of materials. Wet press molded pulp is a prime example of how these principles can be put into practice in the packaging industry.One of the key advantages of wet press molded pulp is its raw material source. It is predominantly made from recycled paper and cardboard, which reduces the demand for virgin materials and diverts waste from landfills. By using recycled materials as its primary source, wet press molded pulp supports the circular economy by closing the loop on paper and cardboard waste.

　　Furthermore, the production process of wet press molded pulp packaging aligns with circular economy principles. The manufacturing process starts with the collection of used paper and cardboard, which is then processed into a pulp. This pulp is mixed with water and formed into shape using molds. After shaping, the wet pulp is subjected to a pressing process to remove excess water, resulting in a sturdy and durable packaging material.The versatility of wet press molded pulp allows it to be used for various packaging applications, from food and beverage trays to protective cushioning for electronic devices. This flexibility contributes to the circular economy by extending the lifespan of recycled materials and reducing the need for single-use plastics and other non-biodegradable packaging materials.

　　molded pulp packaging

　　biodegradable pulp packaging

　　recycled pulp packaging

　　In addition to its sustainable sourcing and production process, wet press molded pulp packaging is also fully recyclable and biodegradable. This means that at the end of its useful life, the packaging can be recycled to make new molded pulp products or composted to return nutrients to the soil. By ensuring that the end-of-life options for packaging align with circular economy principles, wet press molded pulp closes the loop on its own lifecycle and minimizes its environmental impact.The adoption of wet press molded pulp packaging by businesses further promotes circular economy principles by encouraging a shift towards a more sustainable and resource-efficient approach to packaging. As more companies choose eco-friendly packaging solutions, the demand for wet press molded pulp products increases, creating a market for recycled materials and driving investment in sustainable packaging technologies.

　　Overall, wet press molded pulp supports circular economy principles by utilizing recycled materials, minimizing waste, and offering fully recyclable and biodegradable packaging solutions. Its adoption by businesses contributes to the transition towards a more sustainable and circular approach to packaging, demonstrating the potential for innovative materials to drive positive change in the industry.

　　As an environmentally friendly and sustainable new material, pulp molding has a wide range of applicability and great development potential. In the application of industrial packaging, cultural and creative, gifts, daily necessities, agriculture, medical and catering, it has shown obvious environmental advantages and sustainable development characteristics.By switching to pulp molding packaging, we can effectively reduce dependence on limited resources, reduce energy consumption and greenhouse gas emissions, reduce environmental pollution, and contribute to sustainable development. In today’s emphasis on low carbon and sustainable development, the production and use of pulp molding has further promoted the sustainable development of society. Here are 5 reasons to switch to pulp molding packaging.So we can draw a preliminary conclusion, wet pressed molded pulp It is helpful to the needs of the industry market and social development. https://www.pulptray.com/

　　1. Pulp molding has a wide range of uses

　　Pulp molding is easy to use and can be cast into various shapes and sizes as needed. This makes pulp tray packaging very suitable for daily use, adding sophistication and extra protection to products. Packaging materials can even be customized to millimeter precision to make full use of available resources.

　　Pulp molded packaging suppliers

　　2. The degradable and environmentally friendly nature of pulp molding

　　The use of pulp mould can reduce carbon footprint and alleviate environmental degradation. Since pulp molding products come from natural fibers and materials, they can be 100% recycled. Most importantly, it has no harmful or toxic ingredients. Even if it is dumped in a landfill, natural fibers are biodegradable and compostable. By using natural raw materials, it can help reduce carbon emissions and reverse the damage caused by plastics and other non-biodegradable waste.

　　3. The popularity index of pulp molding has increased year by year

　　Since the issuance of the plastic restriction order, as people’s awareness of environmental protection has increased, it has become an important part of the green packaging field. And it has become a popular choice for corporate customers who value the concept of circular development.

　　4. Pulp molding is cost-effective

　　Compared with traditional packaging, pulp molding products have sufficient raw material sources, pollution-free production and use processes, a wide range of applications, low cost, light weight, high strength, good plasticity, cushioning, interchangeability and other properties, and can be reused and recycled. Therefore, it has a strong application prospect, so pulp molding products are more affordable and cost-effective than traditional packaging.

　　pulp tray packaging

　　pulp tray packaging factory

　　5. Pulp molding provides protective properties

　　Pulp molding packaging can soften vibrations, cushion, block, support and support anything you are shipping, and the additional protection is superior to traditional packaging materials.

　　For example, fresh fruit cushioning packaging, in addition to its cushioning performance protection, can also prevent contact collisions and friction scratches between fruits, and can also emit “stuffy heat” to absorb moisture molecules and suppress “ethylene concentration”, especially in midsummer or tropical areas. Since pulp molding trays do not block heat absorption, they can absorb evaporated moisture, thereby preventing fresh fruits from rotting and deteriorating, playing a role that other packaging cannot play.

　　In today’s tech-driven world, wall power adapters are an essential part of our daily lives, powering everything from smartphones to laptops. But a common question arises: Is it safe to leave a wall power adapter plugged in when not in use? This blog will explore the potential risks and benefits, helping you make an informed decision.In addition to innate advantages, custom power adapter supplier Its own product attributes are also extremely high-end, in order to remain unbeaten in the market competition. https://www.jyh-electronic.com/

　　Understanding Wall Power Adapters

　　Wall power adapters, also known as chargers, convert AC electricity from your wall outlet into the DC power that your devices need. They’re designed to be safe and efficient, but how do they perform when left plugged in without a connected device?

　　Is It Safe to Leave a Wall Power Adapter Plugged in When Not in Use?

　　Potential Risks of Leaving a Wall Power Adapter Plugged In

　　1.Fire Hazard: While modern adapters are designed with safety in mind, leaving them plugged in can pose a small fire risk, especially if the adapter is damaged or poorly manufactured. Older or faulty adapters may overheat, leading to potential fire hazards.

　　2.Energy Consumption: Even when not in use, wall adapters can draw a small amount of power. This “phantom load” might not significantly impact your energy bill, but over time, it contributes to unnecessary energy consumption and environmental impact.

　　3.Wear and Tear: Constantly leaving an adapter plugged in can accelerate wear and tear, reducing its lifespan. This is especially true in environments with frequent power surges or fluctuations.

　　Benefits of Leaving a Wall Power Adapter Plugged In

　　1.Convenience: One of the main reasons people leave adapters plugged in is convenience. Having your charger always ready can be a time-saver, especially in a busy household with multiple devices.

　　2.Minimal Risk with Quality Adapters: High-quality, certified adapters are designed to handle being plugged in without significant risk. They often include features like automatic shutoff when not in use, reducing both fire hazards and energy consumption.

　　Best Practices for Safe Use

　　1.Unplug When Not Needed: To minimize risks, it’s best to unplug wall adapters when they¨re not in use, especially overnight or when you’re away from home for extended periods.

　　2.Use Quality Adapters: Invest in high-quality, certified adapters that are less likely to overheat or cause electrical issues. Avoid cheap, unbranded options that may lack essential safety features.

　　3.Regularly Inspect Adapters: Check your adapters for signs of wear, such as frayed cords, loose plugs, or excessive heat. Replace any that show signs of damage.

　　Conclusion

　　While leaving a wall power adapter plugged in when not in use isn’t inherently dangerous, it does come with some risks. For optimal safety and energy efficiency, it’s advisable to unplug them when not needed, especially if you’re using older or lower-quality adapters. By following these simple precautions, you can ensure that your devices remain charged and your home stays safe.

　　As an environmentally friendly and sustainable new material, pulp molding has a wide range of applicability and great development potential. In the application of industrial packaging, cultural and creative, gifts, daily necessities, agriculture, medical and catering, it has shown obvious environmental advantages and sustainable development characteristics.By switching to pulp molding packaging, we can effectively reduce dependence on limited resources, reduce energy consumption and greenhouse gas emissions, reduce environmental pollution, and contribute to sustainable development. In today’s emphasis on low carbon and sustainable development, the production and use of pulp molding has further promoted the sustainable development of society. Here are 5 reasons to switch to pulp molding packaging.For these reasons, I think molded pulp packaging The situation is still optimistic, and the market is still in a blue ocean stage. https://www.pulptray.com/

　　1. Pulp molding has a wide range of uses

　　Pulp molding is easy to use and can be cast into various shapes and sizes as needed. This makes pulp tray packaging very suitable for daily use, adding sophistication and extra protection to products. Packaging materials can even be customized to millimeter precision to make full use of available resources.

　　Pulp molded packaging suppliers

　　2. The degradable and environmentally friendly nature of pulp molding

　　The use of pulp mould can reduce carbon footprint and alleviate environmental degradation. Since pulp molding products come from natural fibers and materials, they can be 100% recycled. Most importantly, it has no harmful or toxic ingredients. Even if it is dumped in a landfill, natural fibers are biodegradable and compostable. By using natural raw materials, it can help reduce carbon emissions and reverse the damage caused by plastics and other non-biodegradable waste.

　　3. The popularity index of pulp molding has increased year by year

　　Since the issuance of the plastic restriction order, as people’s awareness of environmental protection has increased, it has become an important part of the green packaging field. And it has become a popular choice for corporate customers who value the concept of circular development.

　　4. Pulp molding is cost-effective

　　Compared with traditional packaging, pulp molding products have sufficient raw material sources, pollution-free production and use processes, a wide range of applications, low cost, light weight, high strength, good plasticity, cushioning, interchangeability and other properties, and can be reused and recycled. Therefore, it has a strong application prospect, so pulp molding products are more affordable and cost-effective than traditional packaging.

　　pulp tray packaging

　　pulp tray packaging factory

　　5. Pulp molding provides protective properties

　　Pulp molding packaging can soften vibrations, cushion, block, support and support anything you are shipping, and the additional protection is superior to traditional packaging materials.

　　For example, fresh fruit cushioning packaging, in addition to its cushioning performance protection, can also prevent contact collisions and friction scratches between fruits, and can also emit “stuffy heat” to absorb moisture molecules and suppress “ethylene concentration”, especially in midsummer or tropical areas. Since pulp molding trays do not block heat absorption, they can absorb evaporated moisture, thereby preventing fresh fruits from rotting and deteriorating, playing a role that other packaging cannot play.

　　In today’s tech-driven world, wall power adapters are an essential part of our daily lives, powering everything from smartphones to laptops. But a common question arises: Is it safe to leave a wall power adapter plugged in when not in use? This blog will explore the potential risks and benefits, helping you make an informed decision.Before that, international power adapter The market has also soared for a time, which has attracted the attention of a wide range of investors. https://www.jyh-electronic.com/

　　Understanding Wall Power Adapters

　　Wall power adapters, also known as chargers, convert AC electricity from your wall outlet into the DC power that your devices need. They’re designed to be safe and efficient, but how do they perform when left plugged in without a connected device?

　　Is It Safe to Leave a Wall Power Adapter Plugged in When Not in Use?

　　Potential Risks of Leaving a Wall Power Adapter Plugged In

　　1.Fire Hazard: While modern adapters are designed with safety in mind, leaving them plugged in can pose a small fire risk, especially if the adapter is damaged or poorly manufactured. Older or faulty adapters may overheat, leading to potential fire hazards.

　　2.Energy Consumption: Even when not in use, wall adapters can draw a small amount of power. This “phantom load” might not significantly impact your energy bill, but over time, it contributes to unnecessary energy consumption and environmental impact.

　　3.Wear and Tear: Constantly leaving an adapter plugged in can accelerate wear and tear, reducing its lifespan. This is especially true in environments with frequent power surges or fluctuations.

　　Benefits of Leaving a Wall Power Adapter Plugged In

　　1.Convenience: One of the main reasons people leave adapters plugged in is convenience. Having your charger always ready can be a time-saver, especially in a busy household with multiple devices.

　　2.Minimal Risk with Quality Adapters: High-quality, certified adapters are designed to handle being plugged in without significant risk. They often include features like automatic shutoff when not in use, reducing both fire hazards and energy consumption.

　　Best Practices for Safe Use

　　1.Unplug When Not Needed: To minimize risks, it’s best to unplug wall adapters when they¨re not in use, especially overnight or when you’re away from home for extended periods.

　　2.Use Quality Adapters: Invest in high-quality, certified adapters that are less likely to overheat or cause electrical issues. Avoid cheap, unbranded options that may lack essential safety features.

　　3.Regularly Inspect Adapters: Check your adapters for signs of wear, such as frayed cords, loose plugs, or excessive heat. Replace any that show signs of damage.

　　Conclusion

　　While leaving a wall power adapter plugged in when not in use isn’t inherently dangerous, it does come with some risks. For optimal safety and energy efficiency, it’s advisable to unplug them when not needed, especially if you’re using older or lower-quality adapters. By following these simple precautions, you can ensure that your devices remain charged and your home stays safe.

　　Using a wall power adapter with a higher amperage than your device requires is a common concern for many users. Understanding the impact of amperage on your device is crucial to ensure its safe and efficient operation.In addition to innate advantages, custom power adapter supplier Its own product attributes are also extremely high-end, in order to remain unbeaten in the market competition. https://www.jyh-electronic.com/

　　What is Amperage?

　　Amperage, or current, is a measure of the amount of electrical flow in a circuit, and it¨s typically denoted in amperes (A) or milliamperes (mA). Every electronic device is designed to operate within a specific range of amperage, which is usually listed on the device or its original power adapter.

　　Using a Higher Amperage Adapter: What Happens?

　　When you use a wall power adapter with a higher amperage than your device requires, the outcome is generally safe and, in some cases, beneficial. Here¨s why:

　　1.The Device Draws Only What It Needs:

　　Electronic devices are designed to draw only the amount of current (amperage) they need to operate efficiently. If your device requires 1A and you use a 2A adapter, the device will still only draw 1A. The excess capacity remains unused.

　　2.Lower Risk of Overheating:

　　Because the adapter is capable of supplying more current than is required, it operates under less strain. This can reduce the risk of overheating, potentially extending the lifespan of the adapter.

　　3.Increased Efficiency:

　　An adapter with a higher amperage may be more efficient, especially when powering devices that have fluctuating current needs. For example, devices that temporarily require more current for certain operations will benefit from the extra capacity without straining the adapter.

　　4.Compatibility and Safety:

　　Using an adapter with a higher amperage is generally safe as long as the voltage matches your device¨s requirements. Voltage is the critical factor that determines compatibility. Always ensure the adapter¨s voltage is the same as or very close to the voltage specified by your device.

　　What happens if I use a wall power adapter with a higher amperage?(夕1)

　　Potential Concerns

　　While using an adapter with higher amperage is usually safe, there are a few considerations to keep in mind:

　　1.Overheating in Poor-Quality Adapters:

　　If the adapter is of poor quality, it might not handle the extra current efficiently, leading to overheating or even failure.

　　2.Size and Portability:

　　Adapters with higher amperage often have larger components to handle the increased current, which can make them bulkier and less portable.

　　3.Cost:

　　Higher-amperage adapters can be more expensive due to the more robust components used in their construction.

　　Conclusion

　　Using a wall power adapter with a higher amperage than your device requires is generally safe and can even offer benefits such as increased efficiency and reduced risk of overheating. However, it¨s essential to ensure that the adapter¨s voltage matches your device¨s specifications and that the adapter is of good quality to avoid potential issues. By understanding the relationship between amperage and your device, you can make informed decisions that ensure both safety and optimal performance.

So, drone power supply On the contrary, there is still a lot of room to play. https://current-logic.com/

According to the CCTV news client, the Israel Defense Forces announced that at noon local time on the 23rd, northern Israel was attacked by about 30 rockets from the direction of Lebanon, and the air defense alarm continued to be sounded in the north.

The Israeli army said that the air defense system intercepted most of the rockets and the rest of the rockets fell into no man’s land, causing no casualties. Subsequently, the Israeli army dispatched warplanes to launch retaliatory air strikes against targets in Lebanon and destroyed a rocket firing position.

The Lebanese side has not responded to this for the time being.

Israeli drones strike southern Lebanon

The Israeli military said that on the morning of May 23 local time, the Israeli army launched a drone strike in southern Lebanon, killing a member of Hezbollah. According to the Israel Defense Forces, the deceased, named Nasir Faran, was a key member of Hezbollah in Lebanon and was responsible for weapons manufacturing and procurement.

Hezbollah announced on the same day that a Hezbollah member named Nasir Faran was killed in an attack, but Hezbollah did not provide any information about his identity.

At least 24 people killed in Israeli air strikes on Gaza Strip

The Israeli army launched air strikes on several areas in the northern and central Gaza Strip at night on the 22nd, killing at least 24 people.

The Israeli army launched an air strike on a house in Gaza City in the northern Gaza Strip on the night of the 22nd, killing at least 16 people, 10 of them children. At least eight people were killed in an air raid on a house in Nusaiwright refugee camp in the central Gaza Strip in the early morning of the 23rd.

Palestinian security sources said on the 23rd that the Israeli army withdrew from the West Bank city of Jenin on the same day after the end of the three-day military operation. According to a statement issued by the Palestinian Ministry of Health on the same day, 12 people have been killed and 25 injured in the three-day Israeli military operation in Jenin.

Israeli military operations in the Gaza Strip have killed more than 3.57 million Palestinians and injured nearly 80, 000 since the outbreak of a new round of Israeli-Palestinian conflict in October last year, according to figures released by the Palestinian health department in the Gaza Strip on the 22nd.

Israel will continue to participate in Gaza cease-fire negotiations

In the early morning of the 23rd local time, the Israeli wartime cabinet concluded its meeting for discussion. Israeli Prime Minister Benjamin Netanyahu has ordered that the Israeli delegation will continue to participate in personnel exchanges and negotiations on a ceasefire agreement in Gaza.

The Palestinian Islamic Resistance Movement (Hamas) announced on the 6th of this month that it agreed to the mediator’s proposal for a cease-fire in the Gaza Strip, but Israel said that the conditions agreed by Hamas were far from its demands. Starting from July 7, Hamas, Israel and relevant mediators held cease-fire negotiations in Cairo, Egypt. On the 9th, the negotiations broke down.

The International Court of Justice will rule on South Africa’s demand that Israel stop its offensive against Gaza

Comprehensive Reuters and Agence France-Presse reported that on May 23, local time, the International Court of Justice said it would rule on the 24th on South Africa’s demand for Israel to implement a ceasefire in Gaza.

Earlier, South Africa asked the International Court of Justice to take urgent measures to order Israel to stop its military operations in the Gaza Strip, including in Rafah.

The White House admits to being concerned about the diplomatic isolation that Israel may face

According to CNN News, Sullivan, Assistant to the President for National Security Affairs, said on the 22nd that more and more voices, including those in support of Israel, had turned in the other direction. He expressed concern about this because we believe that it is not conducive to Israel’s long-term security or vitality.

Norway, Spain and Ireland announced the recognition of Palestinian states on the 22nd, which will take effect on the 28th of this month. The three countries said the decision was aimed at speeding up a ceasefire between Israel and the Palestinian Islamic Resistance Movement (Hamas), according to Reuters.

According to the White House, Sullivan said that US President Joe Biden has been openly supporting the two-state solution. But he added that Mr Biden had also publicly stressed that the two-state solution should be achieved through direct negotiations between the parties rather than through unilateral recognition.

Israeli Foreign Minister Katz announced the recall of Israeli ambassadors to Ireland, Spain and Norway on the 22nd, the Israel Times reported. Israeli Finance Minister Smotrih called on Netanyahu to impose severe punitive measures on the Palestinian National Authority. He expressed his intention to take immediate action to stop the transfer of funds to the Palestinian National Authority.

China News Service is integrated from the CCTV news client